LINOVISION POE-SW508G 8 Ports Industrial 802.3bt PoE Switch User Manual
- June 9, 2024
- LINOVISION
Table of Contents
8 Ports Industrial 802.3bt PoE Switch
User’s Manual V3
POE-SW508G
Important Safeguards & Warning
Attention: Please read the following safeguards and warnings carefully
before using the product in order to avoid demages and losses.
Note: Do not expose the device to soot,high humidity or dust.Doing so may
cause fire or electric shock. Do not install the device in direct sunlight as
it may cause overheating and failure. Installation of the units should be via
the compatible rack mount or securely on a flat surface. Do not place the
device on carpet to or around the unit, Doing so may cause overheating.failure
or fire. Do not place stack or place objects on the unit This unit contains o
user serviceable parts,Servicing should only be performed by approved
technicians.
Warning: Do not use a power supply other than the provided manufacture
power supply.Failure to do so may cause unit failure and or demage.
Special Announcements: This manual is reference only. All the designs and
software here are subject to change without prior written notice
Product Overview
Features:
Introduction: This is the latest industrial Ethernet(PoE) Switch that can
operate under WIDE-TEMPERATURE environment ranging from -40 up to 80 degrees C
and is equipped with fiber slots which can be extended from 2 kilometers (via
multi-mode fiber) up to above 100 kilometers (via single-mode fiber),
respectively. In other words, the industrial switch provides more flexibility
for Transportation, Manufacturing, Security and Surveillance with distance
extension without any limitation and is a suitable model either for long or
short distance network deployment. This Industrial unmanaged Ethenet switch is
based on the 1E061643-21:2000 standard, integrated with surge protection fa’
both network signal and power together. It is adapted to the lightning surge
protection for surveillance IP camera by reacting overvoltage, operating over-
voltage and static electricity discharge etc. This Industrial switch is
designed with a compact case that allows either DIN rail or panel mounting for
the efficient usage of cabinet space. It provides an integrated power supply
with a wide range of voltages for worldwide operation.
Common features:
- High performance Store and Forward architecture
- DIN rail and wall mount design
- Confirm to IEEE802.3i , IEEE802.3u, IEEE802.ab, IEEF Sn7 7 and IEEE802.3X standards
- support IEEE802.3af and IEEE802.3at standards
- Contact Discharge 8KV DC; Air Dischargel5KV DC
- -40 to 85 degrees C wide operating temperature
- IP40 industrial metal case protection
Typical Application: The typical application of the device is show as below
Switch installation
:
- Insert Din rail Into the slots, Steel Spring, Din Rail
- Following the left side picture to install the Din rail kits
- Finished installtion as above
Appendix Technical specification
| Model | 8-10/100/1000M+2 Gigabit SFP Unmanaged Industrial 80.23bt PoE Switch |
|---|---|
| Hardware Specifications | |
| Connector | 8-10/100/1000Base-T RJ45 2-1.25G Base-X SFP |
| PoE Port | 4-10/100/1000Mbps PoE+ port, 4-10/100/1000Mbps PoE++ porl |
| LED indicators | Power Indicator: PWR(green).Network Indicator: Link(green) SFP |
Indicator: Link(green)
Switch Architecture| Store and Forward
Backplane bandwidth| 32Gbps
Packet forwarding rate| 16.82Mpps
MAC address| 8k
Power requirement| DC 48-56V
ESD Protection| 6KV ESD
Dimension(WxDxH)| 48mm x 110mm x 150mm(1.89in4.33in5.91in)
Weight| 1.25Kg
Power over Ethernet (PoE) Specifications
Network standard| IEEE802.3i 10 BASE-T ; IEEE802.3u 100 BASE-TX IEEE802.3ab/z
1000 BASE-TX ; IEEE802.3x Flow Contro
PoE Standard| IEEE 802.3af , IEEE 802.3at , IEEE802.3bt
PoE Supply Type| 1/2/4/5(+), 3/6/7/8(-){Port1-Port4} 1/2(+), 3/6(-) End-span
PoE Power Output| Max. 15.4 watts (IEEE 802.3af), Max. 30 watts (IEEE 802.3at)
60 watts (IEEE 802.3bt)
PoE Power budget| Max. 360W
Environment
Environment specification| Operating temperature: -40t-85t , operating
humidity: 5%-95% Storage temperature: -40t-85t , storge humidity:5%-95%
Safety| FCC Part15 Class A,CE.RoHs
Warranty Card
INFORMATION(FILLED BYTHE CUSTOMER)
PRODUCT NAME| | SERIES MUMBER|
---|---|---|---
PRODUCT MODE| | LINKMAN|
CUSTOMER| | ZIP CODE|
ADDRESS| | FAX|
TEL| | SHIPPING DATE|
E-MAIL| | |
Quality Certificate
Checked By’——————–
Date’————-
This warranty card is only valid as it is filled in and got the product
repaired
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>