behringer HA-10G 10 Watt Guitar Amplifier User Guide

behringer HA-10G 10 Watt Guitar Amplifier

Product Information

Specifications:

• Model: HA-40R / HA-20R / HA-10G
• Power Output: 40/20/10 Watts
• Channels: 2 Independent Channels
• Features: VTC Tube Modeling, Reverb, Original Bugera 10/8/6 Speaker
• Website: https://muzcentre.ru.

Product Usage Instructions

Important Safety Instructions:
This product contains dangerous voltage inside the enclosure. Please read the manual carefully before use. Here are some important safety instructions to follow:

1. Read and keep the manual for reference.
2. Avoid water contact. Keep the amplifier away from liquids.
3. Do not remove the cover. No user-serviceable parts inside.
4. Avoid exposure to rain or moisture.
5. Use only recommended attachments and accessories.
6. Ensure proper ventilation around the amplifier.
7. Protect the power cord from damage or pinching.
8. Use only with specified stands or tables.
9. Unplug during lightning storms or long periods of inactivity.
10. Refer servicing to qualified personnel if needed.

Usage Instructions:
Follow these steps to use your guitar amplifier:

1. Connect your guitar to the input jack using a suitable cable.
2. Power on the amplifier and adjust the volume levels as needed.
3. Select the desired channel using the channel switch.
4. Experiment with the VTC Tube Modeling and Reverb features for different tones.
5. Adjust the equalization settings (bass, mid, treble) for your preferred sound.
6. Play your guitar and enjoy the amplified sound through the Bugera speaker.

FAQs

Q: Can I use this amplifier with an electric bass guitar?

A: While designed for guitars, you can experiment with using an electric bass guitar with the amplifier. However, the sound output may vary.

Q: How do I clean the amplifier?

A: Use a dry cloth to gently clean the exterior of the amplifier. Avoid using any liquids or cleaning agents.

Q: What should I do if the amplifier stops working suddenly?

A: Check the power source, cables, and connections. If the issue persists, refer servicing to qualified personnel as per the manual instructions.

HA-40R / HA-20R / HA-10G
40/20/10-Watt Guitar Amplifier with 2 Independent Channels, VTC Tube Modeling, Reverb, and Original Bugera 10″/8″/6″ Speaker.

Important Safety Instructions

CAUTION
RISK OF ELECTRIC SHOCK! DO NOT OPEN!

• Terminals marked with this symbol carry an electrical current of sufficient magnitude to constitute a risk of electric shock. Use only high-quality professional speaker cables with ¼” TS or twist-locking plugs pre-installed. All other installations or modifications should be performed only by qualified personnel.

• This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure – voltage that may be sufficient to constitute a risk of shock.

• This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read the manual.

• Caution
  To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user-serviceable parts inside. Refer servicing to qualified personnel.

• Caution
  To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus.

• Caution
  These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel.

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
17. Correct disposal of this product: This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive (2012/19/EU) and your national law. This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE). The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE. At the same time, your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources. For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
18. Do not install in a confined space, such as a bookcase or similar unit.
19. Do not place naked flame sources, such as lighted candles, on the apparatus.
20. Please keep the environmental aspects of battery disposal in mind. Batteries must be disposed of at a battery collection point.
21. This apparatus may be used in tropical and moderate climates up to 45°C.

LEGAL DISCLAIMER

Music Tribe accepts no liability for any loss that may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, appearances, and other information are subject to change without notice. All trademarks are the property of their respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Auratone, and Coolaudio are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2020 All rights reserved.

LIMITED WARRANTY

For the applicable warranty terms and conditions and additional information regarding Music Tribe’s Limited Warranty, please see complete details online at musictribe.com/warranty.

Controls

HA-40R/HA-20R/HA-10G Controls

1. INPUT – Connect your guitar to the amp with a 1/4″ instrument cable.
2. CHANNEL SELECT – Press to switch between the clean and overdrive channels. The adjacent LED will light when overdrive is selected.
3. GAIN – Adjust the amount of distortion in the overdrive channel.
4. OVERDRIVE VOLUME – Adjust the volume of the overdrive channel.
5. CLEAN VOLUME – Adjust the volume of the clean channel.
6. EQUALIZATION – Adjust the high, middle, and low frequencies of both channels.
7. VOLUME (HA-10G only) – Adjust the overall volume output of the amp.
8. REVERB – Adjust the intensity of the reverb effect.
9. AUX – Connect a phone or MP3 player via a 1/8″ TRS cable.
10. HEADPHONES – Connect a pair of headphones via a 1/8″ stereo cable to monitor the amp sound with speaker simulation. The internal speaker will be muted when the headphones are connected.
11. LINE OUT – Send the amp signal with speaker simulation to a mixer or recording device via a 1/8″ TRS cable.
12. FOOT SWITCH (HA-40R only) – Connect a 2-button footswitch (not included) via 1/4″ TRS cable to control channel switching and reverb on/off. If a single-button footswitch is connected, it will control channel switching.
13. POWER SWITCH – Turn the power on and off.
14. POWER CABLE – Connect the power cable to a mains outlet.
15. OUTPUT (HA-40R only) – Connect an external speaker cabinet with a minimum impedance of 4 Ohms via a 1/4″ speaker cable.

Specifications

| HA- 40R| HA- 20R| HA- 10G
---|---|---|---
Inputs| | |
Guitar input| | 1/4″ TS jack|
Impedance| 220 kΩ unbalanced
Aux input| 1/8″ TRS jack
Impedance| 24 kΩ unbalanced| 47 kΩ unbalanced| 3.3 kΩ unbalanced
Outputs| | |
Headphones| | 1/8″ TRS jack|
Impedance| 32 Ω unbalanced| 32 Ω unbalanced| 32 Ω unbalanced
Line out| 1/8″ TRS jack| —
Impedance| 1 kΩ balanced| —
Output| 1/4″ TS jack| —| —
Min impedance| 4 Ω| —| —
Amplifier| | |
Peak power| 40 W| 20 W| 10 W
Loudspeaker| | |
Type| 10″ Bugera| 8″ Bugera| 6″ Bugera
Impedance| | 4 Ω|
Power Supply| | |
Power consumption| 80 W| 40 W| 20 W
Fuse
100-120 V~, 50/60 Hz| T 1AL 250 V| T 500mAL 250 V| T 250mAL 250 V
220-230 V~, 50/60 Hz| T 500mAL 250 V| T 250mAL 250 V| T 125mAL 250 V
Mains connection| Standard IEC cable
Physical| | |
Standard operating temperature| | 0° C – 40° C (32° F – 104° F)|
Dimensions (H x W x D)| 420 x 425 x 220 mm

(16.5 x 16.7 x 8.7″)

| 340 x 380 x 176 mm

(13.4 x 15 x 6.9″)

| 298 x 289 x 169 mm

(11.7 x 11.4 x 6.7″)

Weight| 10 kg (22 lbs)| 6.1 kg (13.4 lbs)| 3.8 kg (8.4 lbs)

Other important information

Important information

1. Register online. Please register your new Music Tribe equipment right after you purchase it by visiting musictribe.com. Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently. Also, read the terms and conditions of our warranty, if applicable.

2. Malfunction. Should your Music Tribe Authorized Reseller not be located in your vicinity,
   you may contact the Music Tribe Authorized Fulfiller for your country listed under “Support” at musictribe.com. Should your country not be listed, please check if your problem can be dealt with by our “Online Support” which may also be found under “Support” at musictribe.com. Alternatively, please submit an online warranty claim at musictribe.com BEFORE returning the product.

3. Power Connections. Before plugging the unit into a power socket, please make sure you are using the correct mains voltage for your particular model. Faulty fuses must be replaced with fuses of the same type and rating without exception.

FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION

behringer
HA-40R/HA-20R/HA-10G

• Responsible Party Name: Music Tribe Commercial NV Inc.
• Address: 901 Grier Drive Las Vegas, NV 89118 USA
• Phone Number: +1 747 237 5033

HA-40R/HA-20R/HA-10G
complies with the FCC rules as mentioned in the following paragraph:

This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Important information:
Changes or modifications to the equipment not expressly approved by Music Tribe can void the user’s authority to use the equipment.

References

• Music Tribe
• Music Tribe
• Профессиональная акустика — Активные акустические системы.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>