FLEXISPOT E7QB Odin 4 Leg Standing Desk User Manual
- June 9, 2024
- FLEXISPOT
Table of Contents
Healthy Body and Mind
E7QB Odin 4 Leg Standing Desk
User Manualhttps://www.flexispot.com/support/get-help-with-
height-adjustable-desks/flexispot-standing-desk-manual-and-assembly-video
Diagram of Components
Parts Included
NO. | Parts |
---|---|
1 | Supporting beam x2 |
2 | Side bracket x2 |
3 | Lifting columnx4 |
4 | Feetx2 |
5 | Keypadx1 |
6 | Control boXx1 |
7 | Power plugx1 |
8 | Cable management net x1 |
9 | Velcro x 1 |
Accessory Package
Please contact customer service if there are any accessories or tools missing.
Specifications
Max. Load Capacity | 440 lbs (200 kg) |
---|---|
Max. Speed | 1.5″/s |
Adjustable Height Range | 23.8″ -49.4″ (605 – 1255mm) |
Wide Expand | 43.3″ – 74.8″ (1100 – 1900mm) |
Applicable Desktop Size | Length: 70.9″ -94.5″ (1800mm – 2400mm) |
Width: 31.5″ 35.4″ 800mm – 900mm
Installation Process
Pre-installation Guide
Step 1 Attach the side brackets to the beam
Tips: Use the two small blue boxes in the package to cushion the beam for
easier installation.
Step 2 Adjust the length of the supporting beam
a) Turn over the frame. Loosen the four screws of the frame and stretch the
frame.
b) When there are holes on the table top, the beams are stretched to align
with the holes; when there are no holes on the table top, the support plates
on both sides are installed close to the edge of the table top.
Step 3 Affix the tabletop
Fix the screws in the sequence of: Step 4 Install the leg columns
Step 5 Attach the feet Fasten the screws as seen.
Step 6 Fix the keypad
Tips: You can install the keypad on either edge depending on your hand
preference.
Step 7
Attach the control box
Step 8
Connect the wires
Tips: Connection of the same color.
Step 9 Install the string net hook When the table board has holes, the position of the hook is charity according to the holes; When the table board has no holes, the net can be laid flat to determine the position of the hooks.
Step 10
Attach cable management net
Step 11
Finished:
Turn over the desk, make sure the keypad is facing upwards along the process.
How to Use-1
Attention
Please make sure that there are no obstacles in the process of raising and
lowering the table, and ensure that all lines are long enough to move the
table up and down.
Saving the Height
Press “M”. The display will show .Then press the button . The current height will
be saved to the corresponding position.
After saving the height, you can press the , and the desk will
automatically adjust to the corresponding height position saved before. 15
How to Use-2
Adjust the sensitivity of the anti-collision function
To
adjust the sensitivity of the anti-collision function, keep pressing ” ” and ”
” simultaneously for 5s to alternate among level 1, 2, 3 or off.
The indicator levels are as follows:
• “A-1”: low sensitivity
• “A-2”: medium sensitivity
• “A-3”: high sensitivity
• “A-0”: switch off the anti-collision ( Before switching off the function
please make sure there aren’t any object under the desk to prevent potential
damage. ) When the LCD display shows or press and hold the “v”
button until the desk reaches its lowest height. This height will be displayed
on the keypad, which is then reset.
If the exception code E01 or E02 occurs, please retry after 18 minutes. If the ” ” button doesn’t work, check the cable connection, and switch off the power for at least 10s. Switch on the power, press the ” ” button and the LCD display will show or . Then reset by pressing the ” ” button.
Troubleshooting-1
This list is used for checking and solving common faults and errors. Please contact the manufacturer if problem you encounter is not on the list below.
Problem | Solution |
---|---|
No response when pressing the UP button and DOWN button | Check the cable |
connection.
Speed of lifting is slow| Check if the load weighs more than 440 lbs.
Worksurface downward sliding or automatically reset a lot
Can lift but cannot lower down/can lower down but cannot lift| Start the reset
process.
The distance lifted or lowered is not accurate
Overworked beyond duty cycle: Max 2 min on/18 min off| Keep the power off and
stop working for 18 minutes.
Press the down button, worksurface does not drop but rises| Check under the
table for obstructions or slipping wires.
Recycling and Disposal
This product cannot be disposed of as household waste. To prevent damage to
the environment, this product should be recycled. Please use the relevant
recycling systems available to you or contract the distributor or manufacturer
for recycling assistance.
Attention
- Power supply: AC100V – 240V, frequency 50/60HZ;
- Working environment: 32° – 104° F;
- Before cleaning, you have to unplug the power supply cable. Clean with a slightly damp cloth to wipe away the surface dust. Keep all electrical components away from liquids. Do not damage the connection line and keep the plug in a safe position.
- Inside the control box, there are electronic components, metal parts, plastic parts, wires and so on. They should be disposed in accordance with the local laws and regulations. They cannot be disposed as household waste.
- Before using the product, please make sure the product has been installed correctly.
- Before starting use of the product, please read the instructions to fully understand all the product’s functions and settings.
- Keep children away from electric height-adjustable desks, control units and handsets. Manufacturer is not responsible of any damages that result from children’s unpredictable behavior.
- Slight noise caused by the multi wedge belt or brake system will not impact the use of this product.
- Do not use corrosive or abrasive materials to clean this product and please dispose of cleaning solutions in an environmentally friendly manner.
- Understand the risks associated with using this product. Children or those with cognitive impairment should not use this product without supervision.
- If the power supply cord is damaged or broken, it must be replaced by the manufacturer or a relevant specialist to avoid any injuries.
- Please operate in a clean and safe environment. For example, do not left around your tools. And always be careful to deal with packaging materials, in order to avoid any kinds of possible danger. Potential chocking risk exists when children play with plastic bags!
- If necessary, retain the original package for future transportation.
FlexiSpot Limited Warranty
This limited warranty offered byFlexiSpot covers defects in material or
workmanship in new FlexiSpot products. This warranty extends to the original
purchaser only and is non-transferable. Only consumers purchasing FlexiSpot
products from authorized FlexiSpot retailers or resellers may benefit from our
limited warranty.
What is Covered?
The FlexiSpot limited warranty covers our products against defects in material
or workmanship as follows:
-
FlexiSpot Height Adjustable Desk Frames
All height adjustable desks purchased on or after April 1,2022 include a 15-years warranty for all metal and mechanical parts and components, including motors and electrical components. -
FlexiSpot Sit-Stand Desktop Workstations
All standing desks purchased on or after October 5,2016 include a 5-year warranty for the frame, medium-fiber desktop and mechanisms. -
FlexiSpot Desk Bikes
All desk bikes purchased on or after October 5,2016 include a 3-year warranty for the frame, and a 1-year warranty for the electronics and other mechanisms. -
FlexiSpot Mini Steppers
All desk bikes purchased on or after October 5,2016 include a 1-year warranty for the frame, and other mechanisms. -
Accessories
All monitor mounts purchased on or after October 5,2016 include a 5-year warranty for the arms, 3-year warranty for gas spring system and mechanisms.
What are your Remedies? FlexiSpot will replace at no charge to the consumer
the defective parts only or, at FlexiSpot’s option, replace any product or
part of the product that is defective because of improper workmanship and/or
material, under normal installation, use, service and maintenance. If
FlexiSpot is unable to provide a replacement and repair is not practical or
cannot be completed in a timely fashion, FlexiSpot may elect to refund the
purchase price in exchange for the return of the product. In the rare event
that your FlexiSpot product is defective, we will provide you with a
replacement item shipped at no cost to you within the continental United
States. The shipping method for replacement products is FedEx Ground, but
expedited shipping is available if you choose to pay the additional expense.
In addition, you will need to pay the shipping costs if any products need to
be shipped to you at an address outside the continental United States.
REPAIR OR REPLACEMENT (OR, IN LIMITED CIRCUMSTANCES, REFUND OF THE PURCHASE
PRICE) AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDYOF THE
PURCHASER. FLEXISPOT NEITHER ASSUMES NOR AUTHORIZES ANY PERSON TO CREATE FOR
IT ANY OTHER OBLIGATION OR LIABILITY IN CONNECTION WITH THIS PRODUCT.
FlexiSpot Limited Warranty
What is Not Covered?
Our limited warranty does not cover any problem that is caused by:
- Conditions, malfunctions or damage not resulting from defects in material or workmanship.
- Conditions, malfunctions or damage resulting from normal wear and tear, improper installation, improper maintenance, misuse, abuse, negligence, accident or alteration.
- Accessories, connected materials and products, or related products not manufactured by FlexiSpot.
- Conditions, malfunctions or damage resulting from failure to follow the instructions and guidelines relating to the product’s intended use. Our limited warranty is void if a product is returned with removed, damaged or tampered labels or any alterations (including removal of any component or external cover)
How to File a Claim?
In order to receive the benefit of our limited warranty, you need to
process your claim in compliance with the terms of this limited warranty and
follow proper return procedure. To request warranty service, please contact
customer service via email at
contact@FlexiSpot.com or toll free at
855-421-2808. You will need to provide
the sales receipt or other evidence of the date and place of purchase for your
FlexiSpot product.
Implied Warranties and Limitation of Damages
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ALL IMPLIED WARRANTIES
(INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE)
SHALL BE LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY, AND FLEXISPOT
SHALL NOT BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, OR CONSEQUENTIAL
DAMAGES, INCLUDING BUT NOT LIMITED TO LOSS OF PROFITS OR REVENUE, RESULTING
FROM ANY BREACH OF EXPRESS OR IMPLIED WARRANTY OR CONDITION, OR UNDER ANY
OTHER LEGAL THEORY, EVEN IF FLEXISPOT HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. Some jurisdictions do not allow limitations on the duration of
an implied warranty or the exclusion or limitation of special, indirect,
incidental or consequential damages, so the above limitations or exclusions
may not apply to you.
Governing Law This
Warranty shall be governed by the laws of the State of California, USA,
without giving effect to any conflict of laws principles that may provide the
application of the law of another jurisdiction. How State Law Applies This
Warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
Healthy Body and Mind
Website: www.flexispot.com
Tel: 1-855-585-5618
Address: 6475 Las Positas Rd. Livermore, CA 94551
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>