ANKER A1610A Wireless Charging Battery User Manual

ANKER A1610A Wireless Charging Battery

Note: When your Magnetic Battery ex0:1eds the temperature limit. the battery level indicatOI’ will turn ctf. Lei: it cool down before use

• This Otterbox wireless Defender charger is cases. not compatible with non-Magsiie phone cases, sudi as
• Wireless ch<M’g..irs make charging more convenient than wired dlargers, but confined Of OJrrentwireless technology, their dlarging speed is slower than that of wired chargers.
• High temperatures will reduce charging speed and restrict power, which is something that happens to all wireless chargers. It is reoommended that you charge your device in environments with temperatures belcw 25 °C/77°F.
• Both the protective phone case and the position of yoor deviO:! on the wireless charger will affect the charging speed. The farther it is plaO:!d from the O:!nter of the wireless charger, the sl<M1er the chari’ing speed will be.

LED lndic::i:or

Wireless Charging Indicator

| Flashing white| Wireless d1arging activated
Solid white| Charging wirelessly
Flashing white quiddy| Metal or abnormal objects detected
Off| Wireless diargingoff

Battery level Indicator

| Flashing white| Battery input/output
Solid white| Showing the OJrren t battery level
Off| No battery power

Important Safety Instructions

When using this product, basic precautions should alwa:irs befollcwed, induding the follcwing

1. Store the product in a cool and dry plaO:!
2. Do not store the product in a hot or humid environment.
3. Use of a power supply o.- charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons
4. Operatingternperiture should be between 0°Cto40″C/32 °Fto 104°F
5. Do not disassemble the product. Take it to a qualified serviO:! person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons
6. If the product is not used for long periods of time, yoo should charge and discharge it once every three months
7. When chari’ing a device, the product may feel warm. This is a normal operating oonditioo and should not be a cause for concern
8. In no.-mal conditions, the bittery performance will dedine over several years
9. Do not diose of the product in heat or fire
10. Do not dean the product with harmful chemicals or detergents.
11. Misuse, dropping, or exO:!ssive force may cause product damage
12. When disposing of se«>ndary cells or batteries, keep O:!lls o.- batteries of different electroc:hemlcal systems serate from each other
13. Be aware thit a discharged txittery ma:ir cause lire Of smoke Tape the terminals to insulate them

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is sutjed to the follcwing two oonditions:

1. This device:! may not cause harmful interference:!, and Q)
2. this device:! must accept any interference:! received, induding interference that may cause undesired operation.
   WARNING: Changes or modifications not expressly approved by the party- responsible for compliance aiuld vcid the user’s authority to operate the equipment.
   Note: This equipment has been tested and foond to oomplywith the limits for a Class B dii’ital deviO:!, pursuant to PartlS of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference:! in a residential installation This equipment generates, uses, and can radiate radio frequenOf energy and, if not installed and used in accordance with the instructions, ma:ir cause harmful interferenO:! to radio communications. Hi::J,Never, there is no guarantee that interference will not ocOJr in a partict.Jlar installation. If this equipment does cause harmful interferenO:! to radio or television reception, which can be determined by turning the equipment off and on, the user is enaiuraged to try to correct the interference by one o.- more of the foll()ll,ling measures: (1) Reorient o.- relocate the receiving antenna. (2 ) Increase the separation between the equipment and receiver. (3) Conned the equipment into an ootlel: oo a drCt.Jit different from that to which the reO:!iver is oonneded (4) Consult the dealer o.- an experienO:!d radio /TV technician for help

Radiation Exposure Statement
This equipment oomplies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20:m between the radiator &your body
Produd Name: Anker 621 Magnetic Battery (MagGo)
Model: A1610
The following importer is the responsible party (for FCC matters only)
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1800 988 7973

Warning
Magnet only provides wireless charging coil positioning and cannot be used as a mobile phone battery. Notes to users Recommended to be pl.;iced on the table during charging

IC Statement
This device complies with RSS-216 of Industry Canada. Operation is sub ject to the condition that this device does not cause harmful interference

Declaration d’lndustrie Canada
Cet appare1I est conforme a la norme RSS-216 d’lndustrie Canada. Son utilisation est sujette aux conditions voulant que cet appareil ne cause aucune inter1Elrence nuisible

RSS-GenlssueS February 2021
This device contains license-exempt transmitter(s)/receiver(s) that comply with lnno11ation, Science and Economic Development Canada’s license-exempt RSS(s). Operate on is subject to the folk::wing two conditions:

1. This device may not cause i interference
2. This device must act!pt any i interference, in during interference that may cause undesired operation of the device /J.riy changes <X modifications not expressly appro11ed by the party responsible f<X compliance could 11oid the user’s auth<Xity to operate the equipment

RSS-Gen numero 5 F’li!vrier 2021
Cet apparei! contient des emetteurs / recepteurs exempt!!s de licence conf<Xmes aux RSS (RSS) d’lnnovation, Sciences et Developpement economique Canada. Le fonct ionnement est soumis aux deuxconditions suivantes·

1. Cet appareil ne doit pas causer d’interfefences.
2. Cet appareil dott aca!pter toutes les interferences, y compris celles s usc:eptibles de pro11oquer un fonctionnementindesirable de l’areil.Tout changement ou modification non expressement app!’ou11e par la partie responsable de la conf<Xmite pourrait annulerl’aut<Xite de l’utilisateur a utiliser l’Elquipement.

RF exposure statement
The equipment complies with IC Radiation exposure limit set forth for uncontrolled en11ironment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body This device complies with Industry Canada license-lCES-003. Operating on is subject to the following two conditions: (1) This de11ice may not cause interference, and Q) This device must accept any interference, induding inte rlerence that may cause undesired operation ct the device. This digital apparatuscomplies with CAN ICES-003(B);NMB-003(B) Le present appareil est conforme aux CNR d’ lnno11ation, Sciences et Developpement Elconomique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisee aux deux conditions sui11antes :

1. l’appareil nedoit pas produire de brouill.;ige, et
2. l’utilisateur de l’appareil doit accepter tout brouillage radi◊eledrique sub( meme si le brouillage est susceptible d’en compromettre le fonctionnement.

EU Declaration of Conformity
Herebf, Anker Innovations limited declares that the p(oduct type A1610 is in compliance with Directi11es 2014/53/EU &2011/65/EU. The full text of the EU declaration of conformity is a11ailable at the following internet address:
https://www.anker.com/ this symbol indicates that this prduct shalt not be treated as househ_old waste. Instead  1t shall be handed over to the applicable c:olled10n pomt for t he recydingof eledrical and – electronic equipment.

GB Declaration of Conformity
Herebf, Anker Innovations Limited declares that the p(oduct type A1610 is in compliance
with Radio Equipment Regulations 2017 and The Restriction ct the Use ct Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012. The full text of the GB declaration ct conformity is a11ailable atthe follcwing internet address: https://www.anker.com
similar accessories used by this de\lice should not coritain any metallic components. Body­worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be a11oided. Use only the supplied or an approved antenna This device is in oomplianc:ewith the essential requirements and other rele11ant provisions of UKCA. All essenti al radio test suites have been carried out.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>