Flip Plop Pool Mineral Dispenser Plus User Manual
- June 4, 2024
- Flip Plop
Table of Contents
Flip Plop Pool Mineral Dispenser Plus User Manual
This is not a toy.
For sanitizing pop-up pools.
Hey! Cool Pool Flip Plop XL® sanitizing mineral pool care will help destroy bacteria to keep your pool clean with less work and up to 50% less chlorine.*
It is super easy to use and will keep you enjoying a clean, clear swimming pool for weeks at a time. Here’s all you do:
Step 1: Preparing the Pool
- Make sure the pool has adequate circulation. The total volume of pool water must completely circulate through the pump and filter at least 1 to 2 times per day. This usually requires 8 to 12 hours of circulation.
- Check the pool’s filter gauge often and periodically clean the filter per the manufacturer’s directions. A dirty filter will slow the flow of water which could hamper proper circulation.
- Check the Water Hardness of your fill water before adding to the pool. If calcium content is higher than 400 ppm find a soft water source to fill your pool instead; otherwise water balance will be very difficult.
- For best results in achieving water balance, follow steps a through e in order.
IMPORTANT: Always follow printed instructions on the balancing chemical packages. Add balancing chemicals in small increments one at a time with circulation running. Wait 8-12 hours before testing again and adding any additional balancing chemicals.
Never add any types of chlorine, pH adjusters, shock treatments or algaecides within 3 feet of Flip Plop XL. Damage to the pool or equipment, unsafe pool conditions, fire or explosion could result.
*Compared to the minimum EPA recommended chlorine level of 1.0 ppm for a stabilized
swimming pool.
Step 2: Putting the System to Work
Step 3: Setting the Dial
Twist the dial on the chlorine cartridge to the setting number for your pool size (see Setting Chart). If you find less chlorine is needed, turn the dial to a lower setting. If more is needed turn to a higher setting. Even at the lowest setting there will be some chlorine released into the pool.
NOTE: Calculate pool gallons by multiplying diameter x diameter x water height (feet) x 5.9 or visit our pool volume calculator at flipplop.com.
Step 4: Routine Pool Care
Troubleshooting
Learn more atheycoolpool.com or call 800.222.0169
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>