Intelligent Energy G300MV1000 Portable Power Station Instructions

Product Specification Sheet

G300MV1000 Portable Power Station

P r od u c t M od e l / V e r s i o n| G 30 0 V 1 . 3 . 0 0
Product S p e c i f i c a t i o n s| 300 W / 28 8 . 6 W h
S p e c i f i c a t i o n Version| A0
D a t e o f i ss u e| 2022-9-5
Huizhou Intelligent Energy Co., Ltd.

to copy| To exam ine| A p p r o v a l
Yang Chao| | Gu Jinbo
C u s t o m e r S i g n a t u r e :

confirm| To examine| Approval
| |
Revision record

Version number| date| Revised content explaination| Draft| Approva l
| | | |
| | | |
| | | |
| | | |
| | | |

Introduction

1.1 About this product
Product model: G300 (US) standard) Product
version number: V1.3.00

1.2 About this specification
This product specification is compiled and released by the company’s product center, which is the specification of the product released by the company, and is an important basis for the company to carry out the relevant work of this product (including production, inspection, testing, certification, marketing, etc.).
This product specification is maintained and updated by the company’s product center.

1.3 Normative reference
Reference standards are as follows:

1. GB31241-2014 “Safety requirements for li-ion cells and pool sets for mobile electronic products”(StateHome Standard No.1No. The amended）
2. GBT35590 – 2017 “General Standard for Mobile Power Supply for Digital Equipment”
3. CethTS018-2020Portable Lithium Ion Battery Energy Storage Power Source Certification Product Specification(for the first time)

Product Overview

G300 is a standard in line with the United States AC power consumption, the rating of 300 W AC output, using the 18650 Ternary lithium battery, the battery capacity is288.6WhPortable energy storage power products, suitable for household emergency electricity, outdoor travel, emergency disaster relief, field work and other occasions.
The product AC total output power is 300 W, with a 120 V AC output, three
QC3.0 Standard USB-A Output, all the way in line with PD60 Standard USB-C Output, two ways DC5525 output With all the cigarette lighter mouth output, builtin 5W LED Lighting and SOS Alarm function, support 10W Wireless charging function.
This product comes standard with 15 V / 4A of AC Adapter Support 120VAC charging, but also supports DC photovoltaic18V/60-120W Charging and DC12V The car charger charges the product.

Schematic diagram of the whole machine

Switches and buttons

S e r i al numb er| Key name| Numb er| Intr oductions
---|---|---|---
1.| Master switch button| 1 indiv idual| Press the master switch, turn on, LCD screen lights up. Touch and press off.
Press the master switch to control:DC5525 With the cigarette lighter output, the controlUSB-A、USB- C, Wireless Charge Output
2.| AC Output Switch| 1 indiv idual| Control the AC output.
3.| DC output switch| nothi ng|
4.| USB/Wireless charging switch| nothi ng|
5.| Light switch| 1 indiv idual| Normal: Short Press1 Next light, and then short press1 Secondary closure SOS: Continuous Short Press2 Next Flash, Short Press1 Next change light, and then short press1 Secondary closure

LCD screen display

S e r i al numb er| I nformation item| type| Intr oductions
---|---|---|---
6.| Battery power| blend| Displays the current battery charge as an energy column+Percentage presented. The main switch is turned on, and the battery power is displayed.
During charging, the energy column is displayed dynamically.
7.| Charging power| nume rica l value| When charging,“POWER IN”The icon lights up and shows the charging power.
8.| DC output power| nume rica l vale| After the master switch is turned on,“DC OUT”Icon lights up and displays the total DC output of the Use power.
9.| USB/Wireless charging output power| nume rica l value| After the master switch is turned on,“USB OUT”The icon lights up and displays theUSB-A 、
USB-CThe total power output of the three wireless charging.
10.| AC output power| nume rica l value| After the AC output switch is turned on, “AC OUT”The icon lights up and displays the communication Total used power output
---|---|---|---
11.| Lighting lamp| icon| Light on, light bulb icon on
12.| fan| icon| Core ≥ detected45 Degree or power ≥60%After the rated load, the fan starts, Fan icon lights up
13.| Temperature alarm| icon| The temperature of the battery cell is detected to reach the set protection value, if the charging protection temperature value is reached, the exclamation mark icon flashes, if the discharge temperature protection value is reached, the exclamation mark icon Often bright.

Product function and performance

6.1 Battery pack characteristics

project| M in i m u m| standar d| Maximu m| Intr oductions
---|---|---|---|---
Cell type| | Li-ion| |
Voltage| 11.2V| 14.6V| 16.8V|
capacity| 16.95Ah| 13AH 288.6Wh| | Factory capacity: 0.5C, ≥ 16.95Ah （0.2CCharge to16.8V，0.02CCurrent cutoff,0.5CDischarge to11.2V, resulting capacity)
Charging high temperature protection| 45℃| 50℃| 55℃| Battery temperature exceeds this value, stop charging, charging protection diagram Exclamation point flashing; (via Master Control)
Charging high temperature protection Post-recovery| 40℃| 45℃| 50℃| After the high temperature protection stops charging, it returns to this temperature and automatically recovers.
Recharging (via master control)
Low temperature| -5℃| 0℃| 5℃| Battery temperature below this value, stop charging, charging protection diagram
protection for charging| | | | Exclamation point flashing (via master control)
---|---|---|---|---
Low temperature protection for charging Post-recovery| 0℃| 5℃| 10℃| After the low temperature protection stops charging, it returns to this temperature and automatically recovers. Recharging (via master control)
High temperature discharge protection| 60℃| 65℃| 70℃| Battery temperature exceeds this value, stop discharge Discharge protection icon Exclamation point is always bright (via master control)
High temperature discharge protection  Post-recovery| 55℃| 60℃| 65℃| High temperature protection after termination of discharge, return to the temperature, you can press Key recovery (via master control)
Discharge cryogenic protection| -10℃| -15℃| -20℃| Cell temperature below this value, stop discharge, discharge protection diagram Exclamation point is always bright (through the main control)
Discharge cryogenic protection Post-recovery| -15℃| -10℃| -5℃| Low temperature protection after termination of discharge, return to the temperature, you can press Key recovery (via master control)

6.2 DCinput(Charge）Characteristic

project| M in i m um| stand ard| Maxim um| Intr oductions
---|---|---|---|---
DC Charging mode| | | | SupportAC Adapters, car chargers,PV
---|---|---|---|---
PV Input port| | 1 indivi dual| |
DC Input por| | 1 indivi dual| |
DC Input voltage| 12V| 15V| 26V|
DC Input current| | 3.4A| 5A|
DC Input power| | 52W| 55W|
PV Input voltage| 18V| 18V| 26V|
PV Input current| | 3A| 5A|
PV Input power| | 52W| 55W|
Car charging input voltage| 12V| | 15V|
Car charger input current| | 4A| 5A|
Car charger input power| | 48W| 55W|
Multiple charging at the same time| | Not
suppor ted| | When charging, only one input mode can be selected to charge the product.
Charge and put| | Not
suppor ted| | Only supported when chargingDC，USBOutput, not supportedACOutput;

6.3 A C O u t p u t c h a r a c t e r i s t i c s

project| M in i m u m| standa rd| Maximu m| Intr oductions
---|---|---|---|---
AC Output Jack| | 1| | Meiji
AC power transfer| | 300W| 310W| Pool Set Voltages 12.8 ~ 16.8 V With PF1.0R Load
Output peak power| | 600W| | Protection Off Output after Maximum Power Continues 200 ms
AC Out Wave| | sine wave| | Resistance R load
THDV| | 5%| |
---|---|---|---|---
AC Frequency| 59HZ| 60HZ| 61HZ|
No-load output voltage| 105V| 120V| 130V|
Output voltage with load| 100V| 120V| 130V|
Inverter efficiency| 85%| 87%| | Load current at rated voltage 40%, 60%, 80%, 100%
The Average Efficiency of Four Points with R Load Plate End
AC Effective Output Capacity amount| 210wh| | | Ambient temperature 25 ± 2 degrees, rated power test;
AC output short circuit protection protect| | Support| | Turn off output, no damage to circuit, key recovery
AC Overload Protection| 310W| 350W| 390W| 1. ACThe load power is greater than the350WContinued3SPost-trigger overloadProtection, OffAC, Key Recovery 2.DC + USB + ACThe load power is greater than the350WPost-trigger overloadProtection, OffAC, ReservationsDC/USBOutput, key recovery complex
Inverter overtemperatu re protection| 85℃| | | Turn off the AC output, button recovery

6.4 D C 552 5 + F l a r e O u t p u t C h a r a c t e r i s t i c s

project| M in i m u m| standa rd| Maximu m| Intr oductions
---|---|---|---|---
DC5525 Port| | 2| |
Cigarette Lighter Port| | 1| |
No-load output voltage| 11V| 12.8V| 14V|
Load output voltage| 10.5V| 12.8V| 13.8V| Battery at 13.6V with load 12 V
Output current| | 10A| | Two way 5525 + one way cigarette lighter total output
Output current limiting protection| 10.1A| 11.5A| 13A| Turn off output, no damage to circuit, key recovery
Output short circuit protection| | Support| | Turn off output, no damage to circuit, key recovery

6.5 USB-AOutput characteristics

p r o j ect| M in i m um| standa rd| M ax i mum| Intr oductions
---|---|---|---|---
USB A port| | 3| |
QC3.0| | Support| |
Output power| | 18W| |
5V No-load output| 4.6V| 5V| 5.5V|
5V Full Load Outputer| 4.65V| 5V| 5.5V|
5V Positive Current| —| 3A| —|
9V No-load output| 8.6V| 9V| 9.5V|
9V Full Load Outputer| 8.5V| 9V| 9.5V|
9V Positive| —| 2.0A| —|
Current| | | |
---|---|---|---|---
12V No-load output| 11.6V| 12| 12.6V|
12V Full Load Outputer| 11.5V| 12V| 12.5V|
12V Positive Current| —| 1.5A| —|
Automatic identification| —| Yes| —|
Output current limiting protection| 3.1A| 3.8A| 4.5A|
Output short circuit protection| | Support| | Turn off the output, without damaging the circuit, automatic recovery

6.6 USB-COutput characteristics

p r o j ect| M in i m um| standa rd| Maxim um| Intr oductions
---|---|---|---|---
USBC port| | 1| |
PD3.0| | Support| |
Output power| | 60W| |
5V No-load output| 4.6V| 5V| 5.5V|
5V Full Load Outputer| 4.5V| 5V| 5.5V|
5V Positive Current| —| 3A| —|
---|---|---|---|---
9V No-load output| 8.6V| 9V| 9.5V|
9V Full Load Outputer| 8.5V| 9V| 9.5V|
9V Positive Current| —| 3A| —|
12V No-load output| 11.6V| 12V| 12.5V|
12V Full Load Outputer| 11.5V| 12V| 12.5V|
12V Positive Current| —| 3A| —|
15V No-load Outputer| 14.6V| 15V| 15.5V|
15V full load output| 14.5V| 15V| 15.5V|
15V Positive Current| —| 3A| —|
20V No-load output| 19.5V| 20V| 21V|
20V full load output| 19.2V| 20V| 20.8V|
20V Power Supply Current| —| 3A| —|
Automatic identification| —| Yes| —| Output voltage and current according to different load
Output current limiting protection| 3.1A| 3.8A| 4.5A| Turn off the output, do not damage the circuit, self-recovery
Output short circuit protection| | Support| | Turn off the output, do not damage the circuit, self-recovery

6.7 Wireless charging and output characteristics

the circuit, automatic recovery
---|---|---|---|---

6.8 Energy saving and environmental protection characteristics

project| M in i m um| standa rd| Maxim um| Intr oductions
---|---|---|---|---
Automatic shutdown| | Support| | The load power is ≤ 5 W; Continuous 3 H Automatic Shut Down
Whole machine working idle  Power consumption| | 550mA| 650mA| Battery pack output14.6V, OpenDC.USB.ACMeasuring batteryB+ End access
When the whole machine shuts down since Electricity consumption| | ≤1mA| |
Runtime noise| | | 70db| Less than 35db when fan free and less than 70db when fan starts

6.9 O t h e r

project| M in i m um| standa rd| Maxim um| Intr oductions
---|---|---|---|---
Lighting power| | 5W| | Surface light source
Illuminant brightness| | 600LM| | Distance 20CM Test
Illuminant color temperature| | 3000K| |
Lights dormancy| | 3H| | After opening,3HInside unopened beltDC,USB， ACAny function, Turn off the light and enter sleep;

Working environment

project| M in i m u m| standa rd| Maxim um| Intr oductions
---|---|---|---|---
Charging operating temperature| 0℃| 25℃| 40℃| environmental temperature
Discharge operating temperature| -10℃| 25℃| 40℃| environmental temperature
Storage temperature| -20℃| —| 45℃|
Working humidity| 10%| —| 75%|
Storage humidity| | —| 45%|
altitude| | | 2000 rice|
Test ambient temperature| 23℃| 25℃| 27℃|
If the battery is stored for more than three months, please use the charger with the specified parameter range to charge and discharge the product once.
Charge to50%；

Compliance with certification or testing standards

According to the needs of customers can do the following certification or record:
UL2743 report / FCC-sDOC / FCC-ID / UN 38.3 / MSDS / UN box performance list / dangerous package certificate, the cost is the customer’s responsibility.

Certific ation Program| Certification I mp l e m e n t at i on Standards
---|---
FCC-sDOC| FCC 47 CFR Part 15 Subpart B: 2022
FCC-ID| FCC Part15 Subpart C, Paragraph 15.209
UL2743| UL 2743. Edition 2. Revision 2020
UN38.3| ST/SG/AC.10/11/Rev.7/Amend.1

Product physical parameters

The maximum size of the machine appearance:
244 171.4 177mm, The body weight: 3.81KG,

Packing list

Serial numbe r| name| Spec ifications| Numb er
---|---|---|---
1| G300| 300W/288.6Wh| 1
2| User’s manual| G300 :142*210mm| 1
3| AC Fit| American Standard 15V4A 60W| 1

Note

1. Do not put the product into water or rain!

2. Do not heat the product or approach the fire source! Do not disassemble or transform the product without authorization! Do not hit the product hard!
   otherwiseMay cause battery overheating, short circuit, fire or failure of function, shortened life and other hazards.

3. Do not use or place this product in high temperatures (in hot sunlight or in very hot cars), otherwise it may cause overheating of the battery, fire or failure of function, short life, and other hazards.

4. Prohibit disassembly and disassembly of power supply

5. Prohibit short circuit of the power battery

6. Prohibit the use of non-dedicated charger to charge the power supply, it will be dangerous;

7. Do not directly touch the leaking battery, the leakage of electrolyte will cause skin discomfort, in case the electrolyte enters the eyes, rinse with water as soon as possible, do not rub the eyes, and quickly sent to the hospital;

FCC STATEMENT : This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>