Rabalux 460 Cerie Light Fitting Instruction Manual

Rabalux 460 Cerie Light Fitting

USAGE AND OPERATION INSTRUCTIONS FOR LIGHT FITTING

• For your safety, mount and put the light fitting into operation based on the instructions. Preserve these instructions.
• Identify the drawings on the product, on the data plate of the product, and in the instructions and take the warning texts into consideration.
• Portable light fitting.
• LED included
• Do not open the product! LED light sources are not replaceable
• At the end of the lifespan of the LED light source, the light fitting must be replaced.
• LED light -source, please do not stare at lights for long time!
• Should you have any problems with putting into operation or operation, contact a qualified electrician.
• The device can be used with a USB-equipped power source. Adapter is not included
• The charger will automatically be turned off when the telephone is charged
• Place a supported mobile device on the middle of the charging surface.
• When the mobile device is fully charged, remove it from the wireless charger.
• Do not place foreign objects, for example steel objects, magnets or magnetic strip cards, between the device and the wireless charger. The mobile device may not get charged properly or it may get damaged due to overheating.
• If the mobile device is not placed properly on the charging surface and depending on the position of the wireless charging coil of the mobile device, the mobile device may not be charged properly.
• If the wireless charger is used at a location with weak signal, it may get disconnected from the network.
• Only those mobile telephones can be charged with a wireless charger that have an option for it!
• The manufacturer and the distributor do not take responsibility in the following cases:
• Connecting devices that cannot be charged with a wireless charger. The device is an IT device only for home use, it cannot be used for industrial or other, commercial purposes!
• The device cannot be used by children, mentally and physically disabled. Please do not allow the above mentioned persons to use the device without supervision. They may not understand that such devices can be harmful.

The symbol for separate waste collection means that the product must be collected separately, i.e. it cannot be placed in the same container with municipal waste. The product used may contain hazardous substances, mixtures and components that may pollute the environment and consequently endanger human health and life. It cannot be disposed of as unsorted municipal waste.

Our products comply with the relative European standards in each case (EN 60598)
The detailed description of the markings shown on the packaging is available on the website www.rabalux.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>