rabalux 2937 Stregobor Ceiling Light Instructions
- June 3, 2024
- RABALUX
Table of Contents
MANUAL A07_LED_20220505_Memory_both_CCT_wallswitch_too
USAGE AND OPERATION INSTRUCTIONS
FOR LIGHT FITTING!
2937 Stregobor Ceiling Light
For your safety, mount and put the light fitting into operation based on the
instructions. Preserve these instructions. Identify the drawings on the
product, on the data plate of the product, and in the instructions, and take
the warning texts into consideration.
Before the mounting, putting into operation, or repair of the light fitting
the circuit in question must be relieved from voltage. It is appropriate to
switch off the cutout securing the circuit in question or if you do not know
which one is the cutout, then, to switch off the cutouts of the consumption
meter.
The light fitting must only be mounted and put into operation by a qualified
electrician!
The producer shall not be liable for incidental damages or accidents arising
from non-standard connection and usage.
Fixed light fitting.
The product is only suitable for inside usage.
The attached drawing should be used when the light fittings are mounted.
Make sure that you do not damage any electric cables when you are mounting the
light fitting.
The colour codes of the wire are the following: black or brown (L) = phase
conductor, blue (N) = neutral conductor, and in the case of a light fitting of
shock protection class I: green-yellow =protecting conductor
Do not open the product! LED light sources are not replaceable
At the end of the lifespan of the LED light source, the light fitting must be
replaced.
The lamp is not designed for dimmer
LED light -source, please do not stare at lights for long time!
The colour temperature can also be adjusted using the wall switch.
The lamp has a memory function:
- when switching on/off using the remote control
- when switching on/off using the wall switch