rabalux 1051 Ceiling Light User Manual
- June 3, 2024
- RABALUX
Table of Contents
rabalux 1051 Ceiling Light
USAGE AND OPERATION INSTRUCTIONS FOR LIGHT FITTING! For your safety, mount and put the light fitting into operation based on the instructions. Preserve these instructions. Identify the drawings on the product, on the data plate of the product, and in the instructions and take the warning texts into consideration.
Before the mounting, putting into operation or repair of the light fitting the circuit in question must be relieved from voltage. It is appropriate to switch off the cutout securing the circuit in question or if you do not know which one is the cutout, then, to switch off the cutouts of the consumption meter.
Fixed light fitting.
- The product is only suitable for inside usage.
- The light fitting must only be mounted and put into operation by a qualified electrician!
- Only to be installed outside arms reach
- Make sure that you do not damage any electric cables when you are mounting the light fitting.
- The lamp is not designed for dimmer
LED light -source, please do not stare at lights for long time! Do not use the lamp in high temperature, or humid area in order to avoid lamp damage! The colour codes of the wire are the following: black or brown (L) = phase conductor, blue (N) = neutral conductor, and in the case of a light fitting of shock protection class I: green-yellow protecting conductor. Only a light source of maximum performance and of the type indicated in the data plate and around the socket can be used for the product. This product contains a light source of energy efficiency class Symbol of the shortest distance (in metres) from the illuminated objects
The distance between the bulb and the lighted object cannot be less than the data indicated in the vicinity of the housings. Both normal, LED and Compact Fluorecsent Light source can be installed into the lamp fitting. It is prohibited in any circumstance to cover the luminaire with thermally insulating material
The producer shall not be liable for incidental damages or accidents arising from non-standard connection and usage. Set the spotlights in cold, cooled down state because they heat up during operation and may cause burns. Bear in mind the lightsources are hazardous waste. Always keep separately with the houshold waste and dispose only at the appointed collection points!
Do not clean the light fitting with detergents or abrasive materials and avoid the contact of liquids with electrical parts. Our products comply with the relative European standards in each case (EN 60598)