rabalux Ceiling Lamp Benicio LED Instructions
- June 3, 2024
- RABALUX
Table of Contents
USAGE AND OPERATION INSTRUCTIONS FOR LIGHT FITTING!
5_MANUAL A07_LED_5420_ALL_20220504
Ceiling Lamp Benicio LED
For your safety, mount and put the light fitting into operation based on the
instructions. Preserve these instructions. Identify the drawings on the
product, on the data plate of the product, and in the instructions, and take
the warning texts into consideration.
Before mounting, putting into operation, or repair of the light fitting the
circuit in question must be relieved from voltage. It is appropriate to switch
off the circuit breaker securing the circuit in question or if you do not know
which one is the circuit breaker then, to switch off the circuit breaker of
the consumption meter. The light fitting must only be mounted and put into
operation by a qualified electrician! The producer shall not be liable for
incidental damages or accidents arising from non-standard connection and
usage.
Fixed light fitting.
The product is only suitable for inside usage.
The attached drawing should be used when the light fittings are mounted.
Make sure that you do not damage any electric cables when you are mounting the
light fitting.
The colour codes of the wire are the following: black or brown (L) = phase
conductor, blue (N) = neutral conductor, and in the case of a light fitting of
shock protection class I: green-yellow =protecting conductor
Warnings related to the fan:
- Never try to stop the vent blades while the vent is still being operated.
- Never stick your finger or any other object through the grill, because it may cause the damage of the blades.
- In case of malfunction or anomaly immediately switch off and unplug the device.
- Never leave the device unattended for a long time while it is being operated.
- Do not let yourself be exposed to the draught generated by the device for a long time, because it may result in the damage of your health.
Do not open the product!
LED light sources are not replaceable
At the end of the lifespan of the LED light source, the light fitting must be
replaced.
The lamp is not designed for dimmer
Hereby, Rábalux Zrt. declares that the radio equipment type [5419] is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.rabalux.com
LED light -source, please do not stare at lights for long time!
Do not dispose lamp in household waste.
Ask you community or township for appropriate environmentally-friendly waste
disposal.
Our products comply with the relative European standards in each case (EN
60598)
5_MANUAL A07_LED_5420_ALL_20220504_01.indd 2
2022. 05. 19. 9:54:46