rabalux C04-CLASS-G Pendant Light User Manual
- June 3, 2024
- RABALUX
Table of Contents
C04-CLASS-G Pendant Light
User Manual
C04-CLASS-G Pendant Light
USAGE AND OPERATION INSTRUCTIONS FOR LIGHT FITTING!
For your safety, mount and put the light fitting into operation based on the
instructions. Preserve these instructions. Identify the drawings on the
product, on the data plate of the product, and in the instructions, and take
the warning texts into consideration.
The product is only suitable for inside usage. Portable light fitting. The
light fitting can be connected to the network by the flat FLEXO plug that can
be found at the end of the electric wire.
Y: If the outer flexible cable is damaged, only the producer or a similarly
qualified electrician may exchange it.
Only a light source of maximum performance and of the type indicated in the
data plate and around the socket can be used for the product.
Symbol of the shortest distance (in meters) from the illuminated objects
The distance between the bulb and the lighted object cannot be less than the
data indicated in the vicinity of the housings.
This product contains a light source of energy efficiency class
In case of the replacement of the bulbs first, release the lamp fitting from
tension (pull out the mains plug), and wait until the bulb is cool. Do not
touch the with your hands the halogen bulbs, use a soft cloth or a tissue to
hold and put them in place.
The producer shall not be liable for incidental damages or accidents arising
from non-standard connection and usage.
Should you have any problems with putting it into operation or operation,
contact a qualified electrician. Do not clean the light fitting with
detergents or abrasive materials and avoid contact of liquids with electrical
parts.
Bear in mind that light sources are hazardous waste. Always keep separately
the household waste and dispose only at the appointed collection points!
Our products comply with the relative European standards in each case (EN
60598)