QuickBOLT 17638 180 Degree Heavy Duty Flat Tile Roof Hook Installation Guide
- September 30, 2024
- QuickBOLT
Table of Contents
QuickBOLT 17638 180 Degree Heavy Duty Flat Tile Roof Hook
RECOMMENDED MATERIALS
- Rafter locater
- Chalk or crayon
- Drill Bit
- Manufacturer’s approved sealant
INSTALLATION INSTRUCTIONS
- Remove the tiles from the install area
- Locate and mark the rafters
- Place the mount and predrill holes.
- Fill the predrilled holes with mfg. approved sealant
- Drive the Mounting Screws
- Place the tiles back over the roof mount
IF USING GALVA FLASHING
- Make a cut in the paper
- Apply sealant to the underside of the Galva Flashing
- Slide the Flashing underneath the paper or nail down edges
- Cover the edges of the Galva Flashing with sealant.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>