QuickBOLT 17585 All Tile Roof Hook Installation Guide
- August 15, 2024
- QuickBOLT
Table of Contents
QuickBOLT 17585 All Tile Roof Hook
INSTALLATION GUIDE
RECOMMENDED MATERIALS
- Rafter locater
- Chalk or crayon
- Drill Bit
- Sealant compatible with roofing materials
INSTALLATION INSTRUCTIONS
1. Remove the tiles from the install area
2. Locate and mark the rafters
3. Place the mount and predrill holes
4. Fill the predrilled holes with sealant
5. Drive the Mounting Screws
6. Place the tiles bock over the roof mount
ADJUSTABLE HOOKS
- Adjust the mount as need be either before or after installation
- The ideal location for the mount on Curved Tiles is over the volley of the tile to minimize drainage
TORQUE REQUIREMENTS
M8 Bolt requires 15 minimum torque ft-lb
IF USING GALVA FLASHING
1. Make a cut in the paper
2. Apply sealant to the underside of the Golva Flashing
3. Slide the Flashing underneath the paper or nail down edges
4. Cover the edges of the Golva Flashing with sealant
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>