QuickBOLT 17662 Split Top with 4 Inch Microflashing Multi Roof Mount Kit Installation Guide
- September 14, 2024
- QuickBOLT
Table of Contents
QuickBOLT 17662 Split Top with 4 Inch Microflashing Multi Roof Mount Kit
Product Information
Specifications
- Product Name: AHJ CONDENSED PERMIT PACKAGE 2024
- Version: 14
- Compatible Roof Types: Asphalt, EPDM, & TPO
- Patent Number: #8448407
- Manufacturer: A Division of QuickScrews International Corp
Product Usage Instructions
Recommended Materials:
Ensure you have the following materials before starting the installation:
- MFG approved sealant
- L-Foot
- Bolt
Installation Instructions:
- Locate and mark the rafter on the roof where you plan to install the AHJ CONDENSED PERMIT PACKAGE 2024.
- Pre-drill a hole at the marked location to prepare for installation.
- (Optional) Fill the pre-drilled hole with MFG approved sealant to enhance waterproofing.
- (Optional) Apply a ring of sealant around the bottom of the L-Foot for added protection.
- Insert the Bolt into the L-Foot assembly.
- Securely attach the L-Foot assembly to the marked rafter using appropriate fasteners.
FAQs
-
Q: Can this permit package be used on other types of roofs?
A: The AHJ CONDENSED PERMIT PACKAGE 2024 is specifically designed for Asphalt, EPDM, & TPO roofs. Using it on other roof types may not provide optimal performance. -
Q: Is the use of sealant mandatory during installation?
A: While sealant is optional, it is recommended to enhance the waterproofing and longevity of the installation.
QB2 (17662)
RECOMMENDED MATERIALS
- Tools to locate and mark rafter
- Drill with a 15/64” drill bit
- MFG-approved sealant (optional)
- 1/2” Nut Setter
INSTALLATION INSTRUCTIONS
- Locate and mark the rafter
- Predrill the hole
- Optional: Fill the predrilled hole with MFG-approved sealant
- Optional: Place a ring of sealant around the bottom of the Microflashing® washer
- Place the Microflashing®
- Insert the Bolt into the L-Foot
- Drive the Bolt until the Microflashing® is compressed
- To compress Microflashing® properly with QB2 use a 150 minimum torque lbs/inch
- The Bolt will compress the Microflashing® and when fully compressed the L-Foot will not rotate.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>