QuickBOLT 17863 4 Inch Multi Roof Mount QB2 Kit Instruction Manual
- August 30, 2024
- QuickBOLT
Table of Contents
17863 4 Inch Multi Roof Mount QB2 Kit
“`html
Product Specifications
- Product Name: AHJ Condensed Permit Package 2024
- Version: 5
- Model Number: 17863
- Roof Types: Asphalt, EPDM, & TPO
- Patent Number: #8448407
- Manufacturer: QuickScrews International Corp
Product Usage Instructions
Recommended Materials
Ensure you have the following materials ready before
installation:
- MFG approved sealant
- L-Foot
- Bolt
Installation Instructions
-
Locate and mark the rafter where the AHJ Condensed Permit
Package will be installed. -
Pre-drill a hole at the marked location.
-
(Optional) Fill the pre-drilled hole with MFG approved
sealant. -
(Optional) Apply a ring of sealant around the bottom of the
L-Foot. -
Insert the Bolt into the L-Foot.
FAQ (Frequently Asked Questions)
Q: Can this product be used on all types of roofs?
A: The AHJ Condensed Permit Package is recommended for use on
Asphalt, EPDM, and TPO roofs.
Q: Is it necessary to use the MFG approved sealant?
A: While it is optional, using the MFG approved sealant is
recommended for added durability and weatherproofing.
“`
AHJ CONDENSED PERMIT PACKAGE 2024
Version 5
17863
BLACK QB2 WITH 4″ MICROFLASHING®
FOR ASPHALT, EPDM, & TPO ROOFS
PATENT # 8448407
A DIVISION OF QUICKSCREWS INTERNATIONAL CORP
INSTALL INSTRUCTIONS
BLACK QB2 (17863)
1
RECOMMENDED MATERIALS
· Tools to locate and mark rafter
· Drill with a 15/64″ drill bit
· MFG approved sealant (optional)
2
· 1/2″ Nut Setter
INSTALLATION INSTRUCTIONS
1. Locate and mark the rafter
2. Predrill the hole
3
3. Optional: Fill the predrilled hole with MFG approved sealant 4. Optional: Place a ring of sealant around the bottom of the
Microflashing® washer
5. Place the Microflashing®
6. Insert the Bolt into the L-Foot
7. Drive the Bolt until the Microflashing® is compressed
4
To compress Microflashing® properly with QB2 use a 150 minimum torque lbs/inch
The Bolt will compress the Microflashing® and when fully compressed the L-Foot
will not rotate.
5
6
7
8