QuickBOLT 17652 Stone Coated Steel Direct Deck Hook Instructions
- September 25, 2024
- QuickBOLT
Table of Contents
QuickBOLT 17652 Stone Coated Steel Direct Deck Hook
Product Information
Specifications:
- Product Name: AHJ Condensed Permit Package 2023
- Version: 2
- Model Numbers: 17652, 17654, 17750, 17751, 17752, 17753
- Material: Stone Coated Steel
- Compatibility: Direct to deck hook for side mount rails
- Manufacturer: A Division of QuickScrews International Corp
Product Usage Instructions
Recommended Materials:
- Hook
- Solar Screws
- Sealant
- 3/16 Drill Bit
- Stone Coated Steel Panel
- Galva Flashing (if using)
Installation Instructions:
- Locate and mark the rafters.
- Snip panel’s Bottom Clip Lock return enough for the hook to sit flush.
- Snip or bend off the cut piece of metal.
- Place the hook and predrill two holes with the 3/16 Drill Bit.
- Remove the hook, clear the debris, and fill the predrilled holes with sealant.
- Place and mount the hook using the Solar Screws.
- Place the Stone Coated Steel Panel back over the installation area and lock into place by sliding the nose of the panel onto the clip joint.
If Using Galva Flashing :
- Make a cut in the paper.
- Apply sealant to the underside of the Galva Flashing.
- Slide the flashing underneath the paper or nail down edges.
- Cover the edges of the Galva Flashing with sealant.
Frequently Asked Questions (FAQ):
-
Q: Can I use this product for installations on all types of roofs?
A: The AHJ Condensed Permit Package is specifically designed for stone-coated steel roofs with side mount rails. It is recommended to consult with a professional for installations on other roof types. -
Q: What type of sealant is recommended for this product?
A: It is recommended to use a high-quality roofing sealant compatible with metal surfaces for best results. Ensure the sealant is weather-resistant and suitable for outdoor use.
AHJ CONDENSED PERMIT PACKAGE 2023
17652 17654, 17750, 17751, 17752, 17753
STONE COATED STEEL DIRECT TO DECK HOOK
FOR SIDE MOUNT RAILS
A DIVISION OF QUICKSCREWS INTERNATIONAL CORP
INSTALL INSTRUCTIONS
RECOMMENDED MATERIALS
- Rafter locater
- Chalk or crayon
- 3/16” Drill Bit
- Aviation or Tin Snips
- Sealant
INSTALLATION INSTRUCTIONS
- Locate and mark the rafters
- Snip panel’s Bottom Clip Lock return enough for hook to sit flush
- Snip or bend off the cut piece of metal
- Place the Hook and predrill two holes with the 3/16” Drill Bit
- Remove the Hook, clear the debris, and fill the predrilled holes with sealant
- Place and mount the Hook using the Solar Screws
- Place the Stone Coated Steel Panel back over the installation area and lock into place by sliding the nose of the panel onto the clip joint
IF USING GALVA FLASHING
- Make a cut in the paper
- Apply sealant to the underside of the Galva Flashing
- Slide the Flashing underneath the paper or nail down edges
- Cover the edges of the Galva Flashing with sealant