FRONT RUNNER F_RRAC318 Cargo Roller Instruction Manual
- September 29, 2024
- Front Runner
Table of Contents
FRONT RUNNER F_RRAC318 Cargo Roller
Thank you for purchasing a Front Runner Cargo Roller / 1000mm. Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received. Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE : Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions. Please call us if you have any questions about the installation of this product.
GET ORGANIZED
IN THE BOX
- 1 X Cargo Roller – 1000mm Long
- 1 X Roller Mount LH
- 1 X Roller Mount RH
- 2 X Spacer
- 2 X M12 Flat Washer
- 4 X M8 x 12 Button Head Bolt
- 4 X M8 Thin Nut
- 4 X M8 Schnorr Washer
TOOLS NEEDED
Installation
PREPARATION
Slide the Mount Bracket together with a M12 Flat Washer and Spacer (Items 2/3, 4 & 5) into each end of the Cargo Roller (Item 1) as shown.
Insert four M8 Thin Nuts (Item 7), two per side into the slats machined slots as shown. Loosely secure the Left & Right Side Roller Mount Brackets (Items 2 & 3) using M8 Button Head Bolts and M8 Schnorr Washer (Item 6 & 8).
Center the Cargo Roller from left to right. Using a 5mm Allen Key, fully tighten all the fasteners.
TIP : Fully tighten one side’s Mount Bracket before applying light
pressure when tightening the other side.
Tightening Torque: M8: 15-20Nm / 11.06 ft lb – 14.75 ft lb.
FINISH
Congratulations! You did it. Take a step back and admire your work!
INSTALL OTHER VEHICLE AND RACK ACCESSORIES 4
Now’s the time to visit your favorite Front Runner Dealer in person or online.
Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters
BornToRoam
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>