3 Legged Thing Nikon Z 9 Zaara Dedicated L-Bracket Instruction Manual

June 3, 2024
3 Legged Thing

3 Legged Thing logo Nikon Z 9 Zaara Dedicated L-Bracket
Instruction Manual

Nikon Z 9 Zaara Dedicated L-Bracket

Look at your box.
See that little sticker with a serial number and a barcode? Peel it off and put it here for safe keeping.
Or don’t.

IMPORTANT
DO NOT USE YOUR L-BRACKET UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE  MISUSE OR INCORRECT USE OF THESE PRODUCTS.

Anatomy of ZAARA

3 Legged Thing Nikon Z 9 Zaara Dedicated L-Bracket -
Parts

1 Base Plate 8 ¼”-20 stainless steel mounting screw
2 Upright 9 Circlip Screw (self containing screw) ¼”-20 accessory thread
3 Cut-out for camera strap lug 10 Dual ¼”-20 & 3/8”-16 thread in base plate

for attachment of accessories
4 ¼”-20 accessory thread| 12 Strap connector
5 Cut-out for rear screen access| 13 Mini Toolz with 4mm and 2.5mm Allen keys
6 Open aspect for port and battery door access| 14 3mm Allen Key
7 Extending base for tethering in portrait| 15 small flat tool

How to extend the upright section

To open the upright section of the bracket, simply unscrew the circlip screw (a) using the mini toolz provided (b) and extend. Once in the desired position, lock the screw  back into place. 3 Legged Thing Nikon Z 9 Zaara
Dedicated L-Bracket - Figure 1

Cable Port Access

When the bracket is fitted to the body of the camera you will have access to the battery and lower set of ports. To gain access to the top ports you will need to extend the  upright to a minimum of notch 2 or 3, following the ‘How to extend the upright’ section.

3 Legged Thing Nikon Z 9 Zaara Dedicated L-Bracket - Figure
2

Attachment of Accessories

On the base plate you will find two 1/4” -20 threaded holes for accessories (c). If you need a larger 3/8”-16 thread for your accessory to be attached, simply use the small flat  tool included in the box and unscrew to remove the adapter (c). You may find you need to also remove the security pin (d). To remove the security pin, use the 3mm Allen  Key provided. 3 Legged Thing
Nikon Z 9 Zaara Dedicated L-Bracket - Figure 3

Warranty Information

Your 3LT product comes with a 5 Year Global Warranty. On the box you will find a sticker with a unique barcode and serial number. Use this serial number to register your products at www.3leggedthing.com/register.
Details of your warranty can be found at www.3leggedthing.com. Your warranty covers 3 Legged Thing products only.
If you have a question or suspect you have a fault, contact us first at www.3leggedthing.com/support.

3 Legged Thing logo

3LeggedThing

/3LeggedThing
@3LeggedThing
Unit 2A Kinsbourne Farm
Bury End
Stagsden
Bedfordshire
MK43 8TS
United Kingdom of Fadeless Splendour

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals