3 LEGGED THING Canon R7 Launches Dedicated Bracket Instruction Manual
- September 6, 2024
- 3 Legged Thing
Table of Contents
3 LEGGED THING Canon R7 Launches Dedicated Bracket
Important Information
DO NOT USE YOUR L-BRACKET UNTIL YOU HAVE READ THESE INSTRUCTIONS. NO WARRANTY CLAIM WILL BE ENTERED INTO FOR THE MISUSE OR INCORRECT USE OF THESE PRODUCTS.
Look at your box.
See that little sticker with a serial number and a barcode? Peel it off and put it here for safe keeping.
Or don’t.
Attachment Of Pd Adapter Plate
- Base Plate
- Upright
- Cut-out for screen
- Open aspect for cable access
- ¼”-20 stainless steel mounting screw
- Weight-saving cut out in base
- Peak Design Capture v3 Adapter Plate with longer 1/4”-20 screw
- Toolz Multi Tool
- QD Socket – Only for QD accessories
- Dual 1⁄4”-20 & 3/8”-16 thread in base plate for attachment of accessories
- 1/4”-20 accessory thread
Attachment of PD adapter plate
To fit the Peak Design Capture v3 adapter plate to the bracket, simply remove the 1/4”-20 from the camera(1), slot in the longer 1/4”-20 screw through the PD plate (2) and line-up the small pin hole with the 1/4”-20 thread (3). The PD plate will simply slot into place and then you can tighten this onto your camera (4).
Warranty Information
Your 3LT product comes with a 5 Year Global Warranty. On the box you will find a sticker with a unique serial number and QR code. Use this serial number to register your products at
Details of your warranty can be found at www.3leggedthing.com/faq Your warranty covers 3 Legged Thing products only.
If you have a question or suspect you have a fault, contact us first at www.3leggedthing.com/support
Customer Support
Unit 2A Kinsbourne Farm Bury End Stagsden Bedfordshire MK43 8TS
United Kingdom of Fadeless Splendour
3LT Social Media
3LeggedThing /3 legged thing @3leggedthing