StarTech AF221C 2-Port Gigabit Midspan PoE Plus Injector User Guide

StarTech AF221C 2-Port Gigabit Midspan PoE Plus Injector

Specifications

• Product: 2-Port 802.3at 30W Gigabit PoE+ Injector
• Model: AF221C-POE-INJECTOR / AF221CE-POE-INJECTOR
• Data Ports: 4
• PoE+ Ports: 2

PRODUCT IDENTIFICATION

Adapter
2| LED Indicator| •      Solid Green: PoE Injector is receiving power
3| Mounting Holes| •      Mount the PoE Injector to an appropriate surface
4| Data Ports| •      Connect an Ethernet Cable to a Network Device

•      Supports 1Gbps , 100Mbps , and 10Mbps

5

|

PoE Indicator

| •      Solid Green: Indicates PoE has been negotiated and power is being supplied to the Powered Device

6

|

PoE+ Ports (Data + PoE)

| •      Connect an Ethernet Cable to a PD (Powered Device)

•      Supports 1Gbps , 100Mbps , and 10Mbps

•      Supports 802.3af and 802.3at

Product Information

For the latest product information, technical specifications, and declarations of conformance, please visit:
www.StarTech.com/AF221C-POE-INJECTOR
www.StarTech.com/AF221CE-POE-INJECTOR

Requirements

Network Cables x 4

Package Contents

AF221C-POE-INJECTOR

• PoE Injector x 1
• NA Power Adapter x 1
• Quick-Start Guide x 1

AF221C-POE-INJECTOR

• PoE Injector x 1
• EU/UK Power Adapter x 1
• Quick-Start Guide x 1

Installation

(Optional) Mount the PoE Injector

1. Determine the Mounting Surface and Location for the PoE Injector.
2. Mount the PoE Injector to the desired Mounting Surface using the appropriate Mounting Hardware (e.g. Wood Screws).

Install the PoE Injector

1. Connect an Ethernet Cable from the Source Network Device (i.e., router, modem, or non-PoE switch) to the Data Port(s) on the PoE Injector.
2. Connect an Ethernet Cable to the appropriate PoE+ Port(s) on the PoE Injector.
3. Connect the other end of the Ethernet Cable used in Step 2 to either a PD (Powered Device) or a PoE Splitter to separate Data and Power.
4. Plug the included Power Adapter into an AC Outlet and connect it to the DC Power Port. Verify that the Power LED is illuminated.

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a different circuit than the receiver.
• Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. If shielded interface cables are included with the product, or if additional components or accessories are designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement

CAN ICES-003(B) / NMB-003(B)
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with ISED Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Warranty Information

This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com
Ltd.
45 Artisans Cres London, Ontario N5V 5E9 Canada

StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd, Brackmills Northampton NN4 7BW United Kingdom

StarTech.com Ltd.
Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>