BORMANN BPC2230 Floor Standing Clothes Rack Instruction Manual
- September 25, 2024
- BORMANN
Table of Contents
BPC2230 Floor Standing Clothes Rack
“`html
Specifications
- Model: BPC2230 075073
- Version: v2.2
- Languages: EN, IT, EL
- Website: www.nikolaoutools.com
Product Usage Instructions
Important Information
Attention: Read the instructions carefully
before installing and using the product.
Attenzione: Leggere attentamente le istruzioni
prima di installare e utilizzare il prodotto.
Technical Data
- Length: 54 cm
- Width: 39 cm
- Height: 50.5 cm
Assembly Instructions
-
Assemble parts A and E as shown in image 1.
-
Assemble parts J and E as shown in image 2.
-
Assemble part L as shown in image 3.
-
Assemble part B as shown in image 4.
-
Assemble parts A, F, and K as shown in image 5.
-
Assemble parts A, D, and H as shown in image 6.
-
Assemble parts A, C, and I as shown in image 7.
-
Note: The long side of the double hole connector is on the
outside. -
Assemble parts D and G as shown in image 8.
Accessories List
Main Parts:
- A
- B
- C
- D
- E
- F
- G
- H
- I
Frequently Asked Questions (FAQ)
Where can I find the digital version of the instructions
manual?
The digital version of the instructions manual is available on
our website. Visit www.nikolaoutools.com and
search
for the product code in the Search field.
“`
BPC2230 075073
EN IT
v2.2
EL
WWW.NIKOLAOUTOOLS.COM
EN IT EL
IMPORTANT INFORMATION / INFORMAZIONI IMPORTANTI /
Attention: Read the instructions carefully before installing and using the
product.
· Keep in mind that there are a few sharp edges on the steel tubes. e careful
not to get cut during assembly.
· Make sure that the product is assembled in accordance with the instructions.
· Before assembly, check to see whether there are any missing parts. Do not
attempt to assemble the product if any part is missing.
· At the end of the assembly process, ensure that all parts have been
assembled correctly.
Attenzione: Leggere attentamente le istruzioni prima di installare e
utilizzare il prodotto.
· Tenere presente che i tubi d’acciaio presentano alcuni spigoli vivi. Fare
attenzione a non tagliarsi durante il montaggio.
· Assicurarsi che il prodotto sia assemblato secondo le istruzioni.
· Prima di procedere all’assemblaggio, verificare che non vi siano parti
mancanti. Non tentare di assemblare il prodotto se mancano dei pezzi.
· Al termine del processo di assemblaggio, verificare che tutte le parti siano
state montate correttamente.
EL
: .
· . .
· .
· , . .
· , .
TECHNICAL DATA / DATI TECNICI /
· With wheels
· Metal frame · 2 fabric shelves · Dimensions: 42 x 55 x 160 cm · Colour: Grey
· Con ruote · Struttura in metallo · 2 ripiani in tessuto · Dimensioni: 42 x 55 x 160 cm · Colore: Grigio
EL
· · · 2 · : 42 x 55 x 160 cm · :
ACCESSORIES LIST / ELENCO DEGLI ACCESSORI / MAIN PARTS / PARTI PRINCIPALI /
Letter / Lettera /
A B C D E F G H I
Quantity / Quantità /
15
Length / Lunghezza /
Appearance / Aspetto /
54 cm
4
39 cm
1
50.5 cm
4
14 cm
2
2
2
4
2
Correct installation method
Metodo di installazione corretto
D
C
D
A D
D
B A B
Horizontal side IT Lato orizzontale EL
J
1
K
1
L
4
Reverse side IT Lato posteriore EL
ASSEMBLY INSTRUCTIONS / ISTRUZIONI DI MONTAGGIO /
2
WWW.NIKOLAOUTOOLS.COM
EN IT EL
L
short side lato corto
long side lato lungo
1. Assemble parts A and E as shown in image 1. 2. Assemble parts J and E as
shown in image 2. 3. Assemble part L as shown in image 3. 4. Assemble part B
as shown in image 4. 5. Assemble parts A, F and K as shown in image 5. 6.
Assemble parts A, D and H as shown in image
6. 7. Assemble parts A, C and I as shown in image 7.
– Note: The long side of the double hole connector is on the outside.
8. Assemble parts D and G as shown in image 8.
1. Assemblare le parti A ed E come mostrato
nell’immagine 1. 2. Assemblare le parti J ed E come mostrato
nell’immagine 2. 3. Assemblare la parte L come mostrato
nell’immagine 3. 4. Assemblare la parte B come mostrato
nell’immagine 4. 5. Assemblare le parti A, F e K come mostrato
nell’immagine 5. 6. Assemblare le parti A, D e H come mostrato
nell’immagine 6. 7. Assemblare le parti A, C e I come mostrato
nell’immagine 7. – Nota: Il lato lungo del connettore a doppio
foro si trova all’esterno. 8. Assemblare le parti D e G come mostrato
nell’immagine 8.
EL
1. 1.
2. J E 2.
3. L 3.
4. 4.
5. , F 5.
6. , D 6.
7. , C 7. – : .
8. D G 8.
3
WWW.NIKOLAOUTOOLS.COM
The instructions manual is also available in digital format on our website
www.nikolaoutools.com. Find it by entering the product code in the Search ” ”
field.
www.nikolaoutools.com. ” ” .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>