UBIQUITI RD-5G31-AC Parabolic Antenna User Guide
- June 3, 2024
- UBIQUITI
Table of Contents
UBIQUITI RD-5G31-AC Parabolic Antenna
Package Contents
- 5 GHz Rocket® radio (sold separately)
- 16 mm or 5/8″ wrench
- 24 mm or 15/16″ wrench
- Shielded Category 5 (or above) cabling should be used for all wired Ethernet connections and should be grounded through the AC ground of the PoE.
- We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernetcable from Ubiquiti. For more details, visit
ui.com/toughcable
Hardware Installation
IMPORTANT: Carefully handle the Dish Antenna with Radome. Deformationsin
its shape may reduce the antenna’s effectiveness 
Specifications
RocketDish RD-5G31-AC
Dimensions| 748 x 748 x 349 mm (29.45 x 29.45 x 13.74″)
Weight| 7.6 kg (16.76 lb)
(Mount Included)
Frequency| 5.1 – 5.8 GHz
Gain| 31 dBi
Max. VSWR| 1.4:1
Wind Survivability| 200 km/h (125 mph)
Wind Loading| 1,028 N @ 200 km/h (231 lbf @ 125 mph)
Polarization| Dual Linear
Cross-Pol Isolation| 35 dB Min.
ETSI Specification| EN 302 326 DN2
Mounting| Universal Pole Mount, RocketM Bracket, and Weatherproof RF Jumpers
Included
Safety Notices
Only use attachments/accessories specifi ed by the manufacturer.
WARNING : Do not use this product in location that can be submerged by
water.
WARNING: Avoid using this product during an electrical storm. There may
be a remoterisk of electric shock from lightning
Electrical Safety Information
- Compliance is required with respect to voltage, frequency, and current requirementsindicated on the manufacturer’s label. Connection to a different power source than thosespecifi ed may result in improper operation, damage to the equipment or pose a fi re hazard ifthe limitations are not followed.
- There are no operator serviceable parts inside this equipment. Service should be providedonly by a qualifi ed service technician.
Limited Warranty
ui.com/support/warranty
The limited warranty requires the use of arbitration to resolve disputes on an
individual basis,and, where applicable, specify arbitration instead of jury
trials or class actions.
Compliance
RF Exposure Warning
The antenna and transmitter must be installed to provide a separation distance from all persons and must not be located or operating in conjunction with any other antenna or transmitter. For the specificc separation distance, refer to the Quick Start Guide for your Rocket device(transmitter).
Online Resources
© 2022 Ubiquiti Inc. All rights reserved
References
- Ubiquiti - Warranty
- UniFi - Rethinking IT - Ubiquiti
- community.ubnt.com/
- WEEE Compliance Statement
- UniFi - Introduction - Ubiquiti
- Software Downloads - Ubiquiti
- Ubiquiti - Warranty
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>