SENA SP151 Bluetooth Communication Systems User Manual

SENA SP151 Bluetooth Communication Systems

Product Specifications

• Product Name: Talkie
• Type: Bluetooth Intercom System
• Components: Main Unit, Armband
• Charging Indicator: Red LED – Charging, Blue LED – Fully charged
• Power On/Off: Press and hold the (+) Button and Center Button for 1 sec to turn on; Tap the (+) Button and Center Button to turn off
• Volume Adjustment: (+) Button – Increase volume, (-) Button – Decrease volume

Product Usage Instructions

Power On/Off:
To turn on the Talkie, press and hold the (+) Button and Center Button simultaneously for 1 second. To turn off the device, simply tap the (+) Button and Center Button.

Volume Adjustment:
Use the (+) Button to increase the volume and the (-) Button to decrease the volume according to your preference.

Mesh Intercom:
Mesh Intercom is automatically activated when the Talkie is powered on. To mute/unmute the microphone, tap the Center Button.

Channel Setting:

1. To enter Channel Setting, double tap the Center Button.
2. Navigate through channels using the (+) Button or (-) Button.
3. To save the selected channel, tap the Center Button.

FAQ

1. Factory Reset:
   If you need to restore the Talkie to factory default settings, follow these steps:

2. Press and hold the Multi-function Button for 10 seconds.

3. The device will automatically reset to default settings and turn off.

4. Certifications and Safety:
   The Talkie complies with FCC regulations for safe usage. For any troubleshooting or further assistance, refer to the user manual or contact customer support.

ABOUT PRODUCT

Overview

The Talkie is a universal Bluetooth Intercom system Talkie’s design makes it easy to attach to arm with a provided Armband. Just Clip the Talkie to the straps, hold the buttons to turn on the device.

Component

Main Unit, Armband

Charging

• Red LED: Charging
• Blue LED: Fully charged

Power On/Off

• On : Press and hold the (+) Button and Center Button for 1 sec.
• Off : Tap the (+) Button and Center Button.

Volume Adjustment

• (+) Button – Increase the volume
• (-) Button – Decrease the volume

Mesh Intercom

• Mesh Intercom On : When the power is turned on, the mesh intercom also turns on.
• Mesh Intercom Off : When the power is turned on, the mesh intercom also turns on.
• Mute/Unmute the Mic : Tap the Center Button.
• Channel Setting :

1.  **Enter the Channel Setting :** Double tap the Center Button.
2.  **Navigate:** Tap (+) Button or (-) Button.
3.  **Save the channel :** Tap the Center Button.

Troubleshooting

• Factory Reset
  If you want to restore the Talkie to factory default settings, use the Factory Reset.

1. Press and hold the Multi-function Button for 10 seconds.
2. The U1 automatically restores the default settings and turns off.

Certification and Safety Approvals FCC Compliance Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antennae
• Increase the separation between the equipment and the receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement

• This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance.
• When equipped, the distance between antenna and one’s head surface is 15mm.

FCC Caution
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.

Industry Canada(IC) Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference
2. this device must accept any interference, including interference that may cause undesired operation of the device.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>