SENA ST1 Spider Motorcycle Mesh Communication System User Guide

SENA ST1 Spider Motorcycle Mesh Communication System User Guide

Downloadable Sena Software

Download the Sena Motorcycles App at Google Play Store or App Store

Sena Motorcycles

• Device configuration
• Over-The-Air (OTA) Firmware Update
  

Download the following items atsena.com.

Sena Device Manager

• Firmware upgrade
• Device configuration setting

**Quick Start Guide, User’s Guide

**

Follow us on Facebook, YouTube, Twitter and Instagram to check the latest information and helpful tips.

Product Details

Installation

• For more information about installation, refer to the User’s Guide

**Using the Clamp Unit

Using the Glued Surface Mounting Plate

Installing the Speakers**

**Installing the Wired Boom Microphone

Installing the Wired Microphone

**

Mesh Intercom Antenna

Pull the Mesh Intercom Antenna outwards slightly to unfold it.

NOTICE

• This Quick Start Guide (Version 2.0.0 or higher) explains how to operate the SPIDER ST1 with firmware version 2.0.0 or higher.
• For operating the SPIDER ST1 with a firmware version lower than 2.0.0, refer to the SPIDER ST1 Quick Start Guide that is available when you connect the SPIDER ST1 to the Sena Motorcycles App

Icon Legen

Tap button/Jog Dial the specified number of times
Press and Hold button/Jog Dial for the specified amount of time
Rotate Jog Dial clockwise (right) or counterclockwise (left).
Rotate while Pressing Jog Dial clockwise (right) or counterclockwise (left).
“Hello” Audible prompt

Basic Operations

**Powering On

Powering Off

Volume Up

Volume Down

**

Checking the Battery Level

Powering On

and “
Battery level is high/medium/low

Phone Pairing

Blinking

“Phone pairing”

Select SPIDER   ST1 in the list of Bluetooth devices detected.

• The headset will enter the Phone Pairing mode automatically when you initially turn on the headset.
• For more information on phone pairing, refer to the User’s Guide.

Using the Phon

**Answer a Call

End a Call

Reject a Call

Call a Voice Assistant

**

Music Control

Play/Pause

Track Forward

Track Backwar

Mesh Intercom™

Open Mesh™: communication within the same channel.
Group Mesh™: communication within the same private group.

• For more information on Mesh Intercom , refer to the User’s Guide

**Mesh Intercom On

Blinking
“ Mesh intercom on, Open Mesh, channel 1”**

**Mesh Intercom Off

“ Mesh intercom off”
**

Note: When Mesh Intercom is on, the SPIDER ST1 will automatically connect to nearby SPIDER ST1 users and the headset will be in Open Mesh ( default : channel 1 ) initially

Open Mesh

Channel Setting (Default: channel 1) in Open Mesh

Using the Button

1. Enter into the **Channel Setting.

“ Channel setting, 1”
**

2. Navigate between channels.
   (1 2 ••• 8 9 Exit 1 •••)

“ #”

3. Save the channel

Using the Sena Motorcycles App”
You can select the channel through the Sena Motorcycles App.

Group Mesh

Group Mesh is a closed group intercom function that allows users to join, leave, or rejoin a group intercom conversation without pairing each headset.

Creating a Group Mesh

Creating a Group Mesh requires two or more Open Mesh users.
Open Mesh

Group Mesh

1. Users (You, B, and C) enter into Mesh Grouping to create a **Group Mesh.

Mesh grouping”**

2. When Mesh Grouping is completed, the users ( You, B and C) will hear a voice prompt on their headset as Open Mesh switches to **Group Mesh.

**

“ Group Mesh”

Joining an Existing Group Mesh

One of the current users in an Existing Group Mesh can allow new users (one or more ) in Open Mesh to join the Existing Group Mesh.
**Existing Group Mesh

Open Mesh

Existing Group Mesh

**

1. One (You) of the current users in the Existing Group Mesh and new users (D and F) in Open Mesh enter into Mesh Grouping to join the **Existing Group Mesh.

“ Mesh grouping”**

2. When Mesh Grouping is completed, the new users (D and F) will hear a voice prompt on their headset as Open Mesh switches to Group Mesh.

“ Group Mesh”

Enable/Disable Mic (Default: Enable)

Users can enable/disable the microphone when communicating in a **Mesh Intercom.

**

Mesh Reach-Out Request

You (caller) can send a request message to turn on the Mesh Intercom to nearby friends who have it turned off.

1. If you want to send or receive a request massage, you need to enable Mesh Reach-Out on the Sena Motorcycles App.

2. While your headset’s Mesh Intercom is on, you (caller) send a request message using the headset’s Button or the Sena Motorcycles App
   [Caller]
   [Caller] “Mesh reach-out request”
   [Nearby Friends] “ Mesh intercom requested”
   

3. Friends who receive the request message need to manually turn on their Mesh Intercom using the headset’s Button or the SenaMotorcycles App

Reset Mesh

If a headset in an Open Mesh or Group Mesh resets the Mesh , it will automatically return to **Open Mesh (default: channel 1).

**

Configuration Menu

**Accessing the Configuration Menu

**

“ Configuration menu”

**Navigating Between Menu Options

Execute Menu Options

**

Troubleshooting

**Factory Reset

Factory reset”
“ Headset reset, good-bye”
**

**Fault Reset

**

Note: Fault Reset will not restore the headset to the factory default settings.

Quick Reference

Basic Operations| Power on/ Power off|
Volume up/Volume down|

Mobile Phone| Answer phone call|
End phone call|
Reject phone call|
Call a Voice Assistant|

Music| Play/Pause music|
Track forward|
Track backward|
TYPE| OPERATION| BUTTON COMMANDS
---|---|---

Mesh Intercom™| Mesh Intercom on/off|
Channel setting|
Mesh Grouping|
Enable/Disable Mic|
Mesh Reach-Out Request|
Reset Mesh|

Sena Technologies Co., Ltd.
Customer Support: sena.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>