SENA 50S-WIFI-USB WiFi Adapter for 50 Series User Guide
- June 3, 2024
- Sena
Table of Contents
Sena WiFi Adapter for 50 Series
Quick Start Guide
Sena 50 Utility App
- Download the Sena 50 Utility App to set up the WiFi Adapter to automatically upgrade your main unit. Android: Google Play Store > ‘Sena 50 Utility’ iOS: App Store > ‘Sena 50 Utility’
- Save time updating the firmware on the main unit with the Sena 50 Utility App and enjoy your adventure even more!
Connection Setup
- Open the Sena 50 Utility App.
- Click the top left Menu button and select the “WiFi Adapter” menu.
- Follow the instructions on the Sena 50 Utility App to connect the WiFi Adapter to a WiFi access point.
Note:
To change the WiFi access point, perform the Factory
Reset then repeat the steps above.
Upgrading the Firmware of the Main Unit
The firmware will be upgraded automatically while your main unit is charging.
If you want to manually upgrade the firmware, change the setting on the Sena
50 Utility App.
Note:
Do not disconnect the WiFi Adapter while upgrading the firmware. The product
may be damaged.
LED Description
Charging Status
| Disconnected
---|---
| Charging (The main unit is powered off.)
| Fully charged
Note:
Charging (The main unit is powered on.)
To upgrade the firmware, power off the main unit.
Firmware Upgrade Status
| Disconnected or no firmware upgrade available
---|---
| Upgrading firmware
| Firmware upgrade completed
WiFi Status
| Disconnected from an WiFi access point
---|---
| Searching for WiFi access point
| Connected to an access point
Powering On
Insert the USB Connector into a USB charger port that is connected to a power source.
Note:
- Any 3rd party USB charger (5 V/1 A) can be used with WiFi Adapter if the charger is approved by either the FCC, CE, IC or other locally approved.
- Do not connect the WiFi Adapter to a USB port on your PC.
Connecting to the Main Unit
Insert the USB-C Connector into the main unit’s USB-C port.
Note:
If you leave the main unit on when connecting it, the charging LED on the WiFi
Adapter will blink red slowly.
Factory Reset
If you want to restore the WiFi Adapter to the factory default settings, you can easily reset the unit:
- Gently insert a paperclip into the pinhole on the back of the unit and lightly press the Factory Reset Button.
- The WiFi Adapter will automatically restart with the three LEDs on.
Note:
The WiFi Adapter will be restored to factory default settings which include
the WiFi configuration setup, the firmware setup and the language setup.
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com