SENA 5S Bluetooth Headset User Manual
- October 27, 2023
- Sena
Table of Contents
SENA 5S Bluetooth Headset
Charging
Power On/Off
Power On : Press and hold the Jog Dial and Phone Button for 1 second
Power Off : Tap the Jog Dial and Phone
Button.
Volume Adjustment
Increase/Decrease the volume : Rotate the Jog Dial clockwise or counterclockwise
Battery Check
Phone, Music Pairing
- Press and hold the phone Button for 5 seconds.
- Search for Bluetooth devices on your mobile phone. Select the Sena 5S in the list of the devices detected on the mobile phone.
- Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
Music Operation
Play or pause music: Press and hold the Jog Dial for 1 second.
Track forward/ back: Rotate while pressing the Jog Dial clockwise or counterclockwise.
Mobile Phone Call Making and Answering
- Answering a call: Tap the Phone Button
- Ending a call: Tap the Phone Button
- Voice dial: Tap the Phone Button
- Speed dial: Double tap the Phone Button
- Rejecting a call: Press and hold the Jog Dial for 2 seconds.
Intercom
Intercom Pairing
- Press and hold the Jog Dial of two headsets for 5 seconds.
- Simply tap the Jog Dial of any one of the two headsets.
Intercom Start/End : Tap the Jog Dial.
Setting
Configuration Menu: Press the Jog Dial for 10 seconds.
Troubleshooting
Factory Reset
If you want to restore the headset to factory default settings, use the
Factory Reset in the configuration menu. The headset automatically restores
the default settings and turns off.
Certification and Safety Approvals FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antennae
- Increase the separation between the equipment and the receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. When equipped, the distance between antenna and one’s head surface is 35mm.
FCC Caution
Any changes or modifications to the equipment not expressly approved by the
party responsible for compliance could void user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>