imoshion Watch band Adjustment User Manual
- September 23, 2024
- imoshion
Table of Contents
imoshion Watch band Adjustment User Manual
Instructions
-
Unfold the watch band buckle before attempting to adjust the band’s length. (A)
-
Position the watch band in the middle of the adjustment tool. Make sure that the arrow lines up with the tool’s tip.
-
Turn the screw to insert the tool’s tip into the watch link hole. This will push out the pin that keeps the watch links connected.
-
Make sure that the hole at the opposite end is in the middle of the removal tool gap. (B)
-
Adjust the band’s length by removing or adding watch links.
-
Please note that the watch link closest to the buckle are also removable. (C)
-
Insert the pin back on the same side it was removed from (the side without arrows), with the rounded end first and the split end last. Press the pin fully into the watch band, ensuring it does not protrude on either side. (D)
