Sonel VT-2 Non Contact AC Voltage Detector with Flashlight User Manual

: September 21, 2024
: Sonel

Table of Contents

Sonel VT-2 Non Contact AC Voltage Detector with Flashlight
Product Information
Product Usage Instructions
Safety
Features
Detector description
Operation
Operating the voltage detector
Battery replacement
Technical data
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Sonel VT-2 Non Contact AC Voltage Detector with Flashlight

Product Information

Specifications:

Model: VT-2
AC Voltage Detection Range: 90-1000 V (50/60 Hz)
Case: Rugged, double molded case
Features: Non-contact detection, LED and audible beeper indicator, built-in flashlight

Product Usage Instructions

Safety:
Before operating the VT-2 voltage detector, read and understand all safety information provided in the user manual. Failure to Follow safety instructions can result in serious injury or death.
Features:
The VT-2 voltage detector offers non-contact detection of AC Voltage in the range of 90-1000 V (50/60 Hz). It comes with a bright LED and audible beeper indicator to show voltage presence. The built-in flashlight with ON/OFF button adds convenience when working in low-light conditions. The detector is compact in size with a pocket clip, making it an essential tool for electricians and tradespeople.
Detector Description:
The VT-2 voltage detector signals the presence of AC voltage through an LED light and acoustic notification. It also features a bright flashlight with a dedicated ON/OFF button and an audible beeper indicator.
Operation:
The Voltage Detector can be used to identify phase conductors, find breaks in wires, and detect AC voltage at outlets, switches, circuit breakers, fuses, wires, and cables. Follow specific instructions to locate breaks in wires based on whether it’s a phase conductor or a neutral conductor.

Operating of Voltage Detector:

Test the unit on a known functioning circuit or component.
If the unit does not function as expected, replace the batteries.
If issues persist, send the unit for repair.
Place the probe tip on or near the circuit to be tested. LED and audible beeper will indicate the presence of AC Voltage in the specified range.

Note:

The voltage detector cannot detect voltage on armored cables, cables in conduits, behind panels, or in metallic enclosures.
The detector may react to extremely low-frequency electrostatic fields from electrified materials.

FAQ:

Q: Can the VT-2 voltage detector be used on armored cables?
A: No, the voltage detector cannot detect voltage on armored cables.
Q: What should I do if the unit does not function as expected?
A: First, replace the batteries. If the issue persists, send the unit for repair.

WARNING
Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.

Safety

This instruction manual and any markings on the tool provide information for avoiding hazards and unsafe practices related to the use of this tool. Observe all of the safety information provided.

WARNING
Read and understand this material before operating or servicing this equipment. Failure to understand how to safely operate this tool can result in an accident causing serious injury or death.
WARNING
Electric shock hazard – contact with live circuits can result in severe injury or death.
WARNING
Electric shock hazard:
- Do not use the unit if it is wet or damaged.
- Do not apply more than the rated voltage between the probe tip and the earth’s ground.
- Do not operate with the case open.
  Failure to observe these warnings can result in severe injury or death.
WARNING
- Do not attempt to repair this unit. It contains no user-serviceable parts.
- Do not expose the unit to extremes in temperature or high humidity (see specifications).
  Failure to observe these precautions can result in injury and can damage the instrument.

Features

Non-contact detection of AC Voltage 90…1000 V (50/60 Hz).
Rugged, double molded case.
May be used to find a break in a wire or detect the presence of voltage at outlets, lighting fixtures, circuit breakers, wires, and cables.
Bright LED and audible beeper indicator if voltage is present.
Built-in bright flashlight with ON/OFF button.
Convenient size with pocket clip.
An essential tool for every electrician and tradesperson.

Detector description

The VT-2 voltage detector is intended to signal the presence of AC voltage with an LED on and an acoustic notification. Built-in bright flashlight with ON/OFF button and audible beeper indicator.

Flashlight
Detector handle
Flashlight power ON/OFF
Detector clip
Detector body
Detector cap

Operation

The Voltage Detector is useful for identifying phase conductors, finding a break in a wire, and detecting the presence of AC voltage at:

outlets,
switches,
circuit breakers,
fuses,
wires and cables.

Note: The voltage detector can be used to find a break in a wire:

to find a break in a phase conductor, trace the wire until the signal stops,
to find a break in a neutral conductor, connect a load between the phase and neutral. Trace the wire until the signal stops.

Operating the voltage detector

Test the unit on a known functioning circuit or component:
If the unit does not function as expected on a known functioning circuit, replace the batteries.
If the unit still does not function as expected, send the unit to repair.
Place the probe tip on or near the circuit or unit to be tested. LED and audible beeper indicate the presence of AC Voltage from 90…1000 V (50/60 Hz).

Note:

The voltage detector cannot detect voltage on armored cable or cable in conduit, behind panels, or in metallic enclosures.
The detector can react to extremely low-frequency electrostatic fields, such as electrified materials.
The detector can show the presence of voltage at a greater distance from the object, in the case of a high concentration of live objects in the near measured object (eg. circuits box).

Battery replacement

Disconnect the unit from the circuit.
Fold back the clip (4) and remove the detector handle (2) by moving it to the right side (according to the picture).
Replace the batteries (the wrong polarity of batteries may damage the detector).
Put the battery compartment cover.

Technical data

The device does not have the character of a standard and therefore is not subject to calibration. The proper form of control for this type of instrument is checking.