FLYCAM B-FLCM-FLN-02 Flowline Starter Body Rig for Camera Instruction Manual
- July 11, 2024
- FLYCAM
Table of Contents
FLYCAM B-FLCM-FLN-02 Flowline Starter Body Rig for Camera
What’s In The Box
- Please inspect the contents of your shipped package to ensure you have received everything listed below.
All rights reserved. No part of this document may be reproduced, stored in a
retrieval system, or transmitted by any form or by any means, electronic,
mechanical, photocopying, recording, or otherwise, except as may be expressly
permitted by the applicable copyright statutes or in writing by the
Publisher.
Flycam Flowline Starter Setup
Front Extension Section Assembly
- Carefully insert the front extension section on the Support bar.
- Now, insert both the side knobs and tighten them securely.
- Front section is securely attached to the support bar.
Support Bar Assembly
- Join the Support bar with Body Support by the push-fit technique.
- Your Jacket is ready to use.
Capture Every Angle
Top Bar with 180° Rotation
Support Bar Height Adjustment
- Loosen all four Adjustment Knobs provided on the back of the Support Jacket.
- Then, move the Support Bar upwards or downwards per your requirement.
- Once the Support bar is at the desired height, re-tighten all four Adjustment Knobs to secure it.
Height Adjustable Support Bar
- Put on the Support Jacket and tighten the buckles provided at the waist and chest.
- Adjust the Jacket per your convenience.
Camera Mounting
-
Attach the Camera (Not Included) to the hook and securely tighten the provided knob to ensure a slip-free connection.
NOTE: It is recommended to attach the minimum required weight (3kg/6.6lb) for pulling down the balancing rope to ensure proper operation of your Flycam Flowline system. -
Use the lever at the back of the Body Support to release rope tension as required.
-
Use the knob at the back of the Body Support to tighten the tension of the rope as required.
YOUR FLYCAM FLOWLINE STARTER BODY RIG FOR CAMERA GIMBALS ALL DRESSED UP AND READY TO GO!
- Warranty: We offer a one-year warranty for our products from the date of purchase. Within this period, we will repair it without charge for labor or parts. The warranty doesn’t cover transportation costs, nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subject to inspection and evaluation by us.
- Liability: We are not liable for damage caused by products we do not supply or from mishandling in transit, accident, misuse, neglect, or lack of care of the product or service by anyone other than our company.
- Contact Us: If you are dissatisfied, please contact us immediately. We promise our utmost support and care until you use our product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>