MOES WHT-PJ01-MS-DB24 WiFi Thermostat Room Temperature Controller Owner’s Manual
- September 27, 2024
- MOES
Table of Contents
MOES WHT-PJ01-MS-DB24 WiFi Thermostat Room Temperature Controller
Specifications:
- Product Name: Large LCD Screen Smart Thermostat
- Model Number: WHT-PJ01-MS-DB24
- Compatibility: Water Heating/Boiler/Electric Heating
- Size: 500x190mm
- Supply Voltage: AC100~240V; 50/60Hz
- Power Consumption: 1W Max (Wi-Fi version 1.5W Max)
- Temperature Setting Range: 5~95°C
- External Sensor Upper Limit: 5~60°C (*Only works with All on 2 SEN setting)
- Switch Deviation: 0.5~10, Factory setting 1
- Ambient Temperature Range: -5~50°C
- Protection Level: IP20
- Housing Material: Anti-Flammable PC
- Frequency Band: 2402MHz~2482MHz
Product Usage Instructions
Installation Guidelines:
- Ensure compatibility with your heating equipment.
- Turn off power before installation or maintenance.
- Follow the provided wiring diagram for installation.
- Use appropriate fasteners when mounting on the wall.
- Avoid excessive pulling of cables to prevent damage.
- Bend hard plastic wires to a suitable angle before installation.
- Professional installation is recommended.
Product Overview:
This smart thermostat is designed for floor heating applications and offers
Wi-Fi connectivity for remote control via smartphone or voice commands. It
features built-in temperature sensors, weekly programming, and room
temperature regulation capabilities.
In the Box:
- Thermostat x1
- Screws x2
- User Guide x1
- (Floor sensor is Optional)
Setting and Usage:
Refer to the user guide for detailed instructions on setting up the
thermostat, connecting to Wi-Fi, programming temperature settings, and
controlling the device remotely. Ensure proper calibration and testing after
installation for safe and effective use.
FAQ :
-
Q: Can I install this thermostat myself?
A: It is recommended to arrange for professionals to install the thermostat to ensure proper setup and functionality. -
Q: What is the external sensor upper limit range?
A: The external sensor upper limit range is between 5°C to 60°C, and it functions when choosing the All on 2 SEN setting in advanced settings.
Large LCD screen smart thermostat
WHT-PJOI -MS-DB24
For Water Heating/Boiler/Electric Heating
Thank you for purchasing our products, please read the following terms
before installation and use:
Please confirm that this product is suitable for your heating equipment before
installation;
- Before installation or maintenance, please make sure to keep the power off;
- Please strictly follow the wiring diagram for wiring installation;
- Installation to the wall, please confirm that the fasteners are suitable for this product;
- Do not pull the cable too hard, otherwise the product will be damaged;
- If a hard plastic wire is used in the installation process, it must be bent to an appropriate angle in advance;
- Please arrange for professionals to install;
- Please contact the after—sales service for equipment failure, please do not try to repair it yourself;
- After installation, please refer to this manual to check again to ensure normal and safe use, and keep this manual properly.
Product overview
This series of thermostats are designed to meet the different scenarios of floor heating application. Wi—Fi version supports remote control including smart phone control and voice control. Thanks to built-in temperature sensors and weekly programming setting, the desired temperature can be comfortably adjusted. With the device, you can conveniently regulate the room temperature.
In the box you will find
- Thermostat 1 pc
- Screws 2pc
User Guide 1 pc (Floor sensor is Optional)
Technical data
- Supply voltage: ACIOO-240V; 50/60Hz
- Power consumption: IW Max (Wi—Fi version 1.5W Max)
- Temperature setting range : 5-950
- External sensor upper limit : 5-600 (*lt only works when choosing All on 2 SEN in advanced setting)
- Switch deviation: 0.5—100, Factory setting IC
- Ambient temperature: —5-500
- Protection level: IP20
- Housing material: Anti—Flammable PC
- Frequency Band: 2402MHz-2482MHz
- Maximum Radio Transmit Power : <20dBm
Features
√ Customized exclusive temperature plan — up to 6 events allowed to set per
day
√ Sail shape design—delicate and elegant
√ Large LCD screen—better user experience
Dimension:(mm)
Before wiring and installing
- Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition.
- Check the rathings given in the instructions and on the product to make sure the product is suitable for your application.
- Installer must be a trained, experienced service technician.
- After installation is complete, check out product operation as provided in these instructions.
- The thermostat operates in full capacity in areas with the altitude of less than 2500m above sea level. Power rating of external load should be less than or equal to 80% rated power of the thermostat in areas with altitudes of 2500m to 4200m.
CAUTION
Electrical Shock or Equipment Damage Hazard. Can shock individuals or short
equipment circuitry. Disconnect power supply before installation.
Sensor failure
Please connect the sensor correctly according to your sensor selection
setting. When it shows an ErO/Er1 error, thermostat will stay power—off till
the error is eliminated.
- Er0: Built—in sensor is short-circuited or disconnected.
- Erl : External sensor is short-circuited or disconnected.
Wiring
Note:
- GA is for water heating;
- water/gas boiler.
- GB is for electric heating; GC is for
Installation
The thermostat adopt pre—guide and limited snap-fit design. It is easy to mount.
- Release front cover by inserting a head screw—driver into bottom crack.
- Connect wires to terminal block per the wiring schematic according to wiring diagram.(Suggested copper wire length is 7—9mm.)
- Attach the thermostat base to wall—cassette by two mounting screws After attaching it, make sure there is no deformation on thermostat. (Suggested torque is 0.2—0.4N.m (2.0—4.1 kgf. cm).)
- Re—mount the front cover via snap-fit connection.
Display symbols
User operation
Power on/off
Press shortly,the thermostat will be turn on/of.
Time setting
Press and hold for 3 seconds to enter time setting, and adjust it as follows:
Choose modified item by pressing and set the week day and clock by pressing “
“or . Finally, confirm by pressing shortly.Temperature setting
Temperature setting
Press or shortly to increase or decrease set point temperature by 0.50C.Child-
lock
Child-lock
Press and hold + for 3 seconds to activate child—lock, the thermostat can be
locked. Press and hold both keys again to deactivate child—lock.
Wi—Fi config (Wi—Fi version only)
Press and hold for 3 seconds to enter WiFi config during power off, and add
the thermostat on Tuya Smart/Smart Life APP.
Temperature Control Mode
Press “M ” shortly to switch between manual mode and auto mode.
- Manual Mode: The temperature is controlled in accordance with the current temperature set via or It remains activated until the next manual change.
- Auto mode : The temperature is controlled in accordance with the set heating profile.Manual changes are activated until the next point at which the profile changes( is displayed on the screen). Afterward, the defined heating profile will be activated again.
Weekly programming setting
For weekdays and weekends up to 6 heating events with individual temperature
settings can be saved with the thermostat. Press and hold “M” for 3 seconds to
enter weekly programming setting, adjust it as follow:
- Choose modified item by pressing “M” , and set the week day, clock and temperature by pressing , or Finally confirm by pressing shortly.
ECO mode
Press shortly to enter ECO mode, and the temperature will be set to 18°C.
Advanced Setting (Usually for Professional Technicians)
During power-off, press and hold “M” for 3 seconds to enter advanced setting
mode，then re-press “M” to switch to next setting item. Finally, confirm by
pressing shortly
Code| Meaning| ** or **
| Default
Value
| Floor Heating
---|---|---|---|---
GA| GB| GC
1ADJ| Temp. calibration| -9.9~9.9°C| 0°C| √| √ √|
2SEN
| ****
Sensor selection
| IN: Temp. control based on built-in sensor OUT: Temp. control based on external sensor ALL: Temp. control based on built-in sensor and limited by external sensor| ****
IN
| ****
√
| ****
√
| ****
×
3LIT| External sensor
upper limit
| 5~60°C| 35°C| √| √| ×
4DIF| Switch deviation| 0.5~10°C| 1°C| √| √| √
5LTP| Frost protection| ON: frost protection on
OFF: frost protection off
| OFF| √| √| √
6PRG
| ****
Weekly programming setting
| 12345: 5+2 week mode
123456: 6+1 week mode
1234567: 7+0 week mode
| ****
12345
| ****
√
| ****
√
| ****
√
8DLY| Delay time of passive
linkage control
| 0~5min| 0| ×| ×| √
9HIT| Temp. upper limit| 5~95°C| 50°C| √| √| √
AFAC| Restore factory
settings
| Press and hold for 3 seconds| /| √| √| √
About WIFI
WI-FI connection
Before using your Wi-Fi thermostat for the first time, you must configure the
Wi-Fi signal and settings through your smartphone or tablet. This will allow
communication between
your connecteddevices.
Step 1 Download MOES App on App store or scan the QR code
MOES App is upgraded as much more compatibility than Tuya Smart/Smart Life
App, functional well for scenes controlled by Siri, widgets and scene
recommendations as the fully new customized service.
(Note: Tuya Smart/Smart Life App still works, but MOES App is highly
recommended)
Registration or Log in.
- Download “MOES” Application.
- Enter the Register/Login interface; tap “Register” to create an account by entering your phone number to get verifica— tion code and “Set password”. Choose “Log in” if you already have a MOES account.
Step 2 Connect the thermostat
- Make sure your phone is connected to 2.4G Wi-Fi and the Bluetooth is enabled.
- Enter the MOS APP, click the “+” icon in the upper right corner.
- Click on “Small Home Appliances” and find “Thermostat”
- Select network distribution mode:
Network distribution mode:
- Bluetooth Mode (BLINK Quickly) When the thermostat is off, press and hold the until the thermostat screen flashes quickly and displays the
icon, and then operate according to the following figure.
APP operation interface description (heating thermostat) Declaration
of conformity
Hereby,WENZHOU NOVA NEW ENERGY CO.,LTD declares that the radio equipment type
R3W is in compliance with Directive 2014/53/EU,2014/35/EU, 2014/30/EU,
2011/65/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.moestech.com/blogs/news/wht-pj01
SERVICE
Thank you for your trust and support to our products, we will provide you with
a two—year worry—free after-sales service (freight is not included), please do
not alter this warranty
service card, to safeguard your legitimate rights and interests. If you need
service or have any questions, please consult the distributor or contact us.
Product quality problems occur within 24 months from the date of receipt,
please prepare the product and the packaging, applying for after-sales
maintenance in the site
or store where you purchase; If the product is damaged due to personal
reasons, a certain amount of maintenance fee shall be charged for repair.
We have the right to refuse to provide warranty service if:
- Products with damaged appearance, missing LOGO or beyond the service term
- Products that are disassembled, injured, privately repaired, modified or have missing parts
- The circuit is burned or the data cable or power interface is damaged
- Products damaged by foreign matter intrusion (including but not limited to various forms of fluid, sand, dust, soot, etc.)
RECYCLING INFORMATION
All products marked with the symbol for separate collection of waste
electrical and electronic equipment (WEEE Directive 201 2/1 9 / EU) must be
disposed of separately from unsorted municipal waste. To protect your health
and the environment, this equipment must be disposed of at designated
collection points for electrical and electronic equipment designated by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences for the environment and human health.
To find out where these
collection points are and how they work, contact the installer or your local
authority.
WARRANTY CARD
- Product Information
- Product Name
- Product Type
- Purchase Date
- Warranty Period
- Dealer Information
- Customer’s Name
- Customer Phone
- Customer Address
Maintenance Records
Thank you for your support and purchase at we Moes, we are always here for your complete satisfaction, just feel free to share your great shopping experience with us.
If you have any other need, please do not hesitate to contact us first, we
will try to meet your demand.
@moessmart
@moes_smart
MOES.Official
@moes_smart
@moes_smart
E‐CrossStu‐GmbH
Mainzer Landstr. 69 ,60329 Frankfurt am Main
- Email: E-crossstu@web.de
- Tel: +4969332967674
- Made in China
EVATOST CONSULTING LTD
- Address: Suite 11, First Floor, Moy Road
- Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
- Tel: +442921680945
- Email: contact@evatmaster.com
WENZHOU NOVA NEW ENERGY CO.,LTD
- Address: Power Science and Technology Innovation Center, NO.238, Wei 11 Road, Yueqing Economic Development Zone, Yueqing, Zhejiang, China
- Tel: +86-577-57186815
- Email: service@moeshouse.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>