Rev-A-Shelf BRC-12CR Side Mount Belt Rack Instruction Manual
- June 12, 2024
- REV-A-SHELF
Table of Contents
BRC-12CR Side Mount Belt Rack
NOTE: SHOWN FOR RIGHT WALL MOUNT.
FOR LEFT WALL MOUNT:
REMOVE ACORN NUTS, ROTATE FRONT PLATE 180 AND RE-INSTALL ACORN
NUTS.
This drawing is the property of Rev-A-Shelf (RAS) and is disclosed in confidence to the extent its subject matter is original to RAS. Any vendor receiving this drawing from RAS shall hold and use this drawing for the sole benefit of RAS and shall not disclose it to, or use or reproduce it for any third party, or perform any act adverse to the interest of RAS with respect to this drawing without the express written permission of RAS. Vendors shall not revise any physical, dimensional or performance characteristic unless authorized by Rev-A-Shelf Engineering.
| B | 4/3/2012 | KRR | ECN12-020 |
|---|---|---|---|
| A | 9/22/11 | BKT | ECN11-058 |
| REV. | DATE | BY | DESCRIPTION OF CHANGE |
NOTE: HOLDS 7 BELTS
PART DIMENSIONS
| MIN| MAX
WIDTH| 2.|
DEPTH| 12.|
HEIGHT| 2.|
WEIGHT|
DIAMETER|
RADIUS|
CONTAINTER CAPACITY|
CONTAINER UOM|
SLIDE SPECIFICATIONS
SLIDE TYPE| BALL BEARING| SLIDE EXTENSION| FULL| MAX WEIGHT
RATING
SLIDE CLOSING| NORMAL| SLIDE LENGTH| 300 MM
SLIDE MOUNTING| SIDE| SLIDE FINISH| 100 LB
MIN CABINET OPENING
WIDTH| 2.5
DEPTH| 12
HEIGHT| N/A
PRODUCT MAX WEIGHT RATING
CUSTOMER DRAWING
INCH| AMERICAN
PROJECTION| | BY| DATE| 
---|---|---|---|---|---
DRAWN
IZE| BKT| 7/14/2011
SIZE
B| BELT RACK 12″
| |
TOLERANCES MAT. DEC.
(WOOD) .XX ±.03 [.8mm] (OTHER) .XX ±.02 (ALL) .XXX ±.005 [.13 FRACTIONS ±1/32|
[.5mm] mm] [.8 mm]| ANGLES
±1/2°| MATERIAL| DRAWING NO
BRC-12CR_CUST| SCALE
0.500
FINISH| PART NO.
BRC-12CR| SHEET OF
2 2