Johnson Controls IQ Panel 4 Hub Alarm Panel Instructions
- September 20, 2024
- Johnson Controls
Table of Contents
Johnson Controls IQ Panel 4 Hub Alarm Panel
Specifications
- Product Name: IQ Panel 4/IQ4 HUB/IQ4 NS
- Software Version: 4.5.1
- Release Date: 08/29/24
Product Information
The IQ Panel 4/IQ4 HUB/IQ4 NS is a smart home control panel that allows users to manage various smart devices and systems within their home.
Product Usage Instructions
System Setup:
Before using the IQ Panel 4/IQ4 HUB/IQ4 NS, ensure that it is properly
installed and connected to your home network following the provided
installation guide.
User Interface
The user interface of the IQ Panel 4/IQ4 HUB/IQ4 NS is designed to be
intuitive and user-friendly. Navigate through the menu options using the
touchscreen display.
Device Control
Control your smart devices such as lights, thermostats, and security
cameras through the IQ Panel 4/IQ4 HUB/IQ4 NS interface. Follow the on-screen
instructions to manage your devices.
Software Updates
Regularly check for software updates to ensure your IQ Panel 4/IQ4 HUB/IQ4
NS is running the latest features and improvements. Follow the update
instructions provided by the manufacturer.
FAQ
-
Q: How often should I check for software updates?
A: It is recommended to check for software updates at least once a month to stay up to date with the latest enhancements. -
Q: Can I add more smart devices to the IQ Panel 4/IQ4 HUB/IQ4 NS?
A: Yes, you can expand your smart home ecosystem by adding compatible devices that can be controlled through the panel.
TECHNICAL SERVICE BULLETIN
IQ Panel 4/IQ4 HUB/IQ4 NS – 4.5.1 SOFTWARE UPDATE – RELEASE NOTES
TSB #: 240829
DATE: 08/29/24
RE: IQ Panel 4/IQ4 HUB/IQ4 NS – 4.5.1 SOFTWARE UPDATE RELEASE NOTES &
UPDATE INSTRUCTIONS
Release Notes:
Fixes/Improvements
- Added support for a Settle Delay Timer at the end of exit delay, to allow devices to restore at time of arming.(UK Feature) (NEW).
- Increased panel and Alarm.com support for PowerG PIR Cameras to 20 devices up from 10 devices.
- Corrected an issue where PG automation device command buffers could artificially be inflated.
- Corrected an issue where IQ4 panels with IQ Hardwire PowerG Modules that updated to v4.5.0 could have their programming change (TSB # 240729).
Update Instructions
Compatibility Note: Your IQ Panel must be on software version 4.4.0 or higher and connected to WiFi to install this updated wirelessly. For any Panels below 4.4.0 – please review the software update instructions located at
SOFTWARE DOWNLOADS – Qolsys
- Swipe down from the top of the screen and touch “Settings”
- Touch “Advanced Settings”
- Enter a valid installer code (default is 1111)
- Touch “Upgrade Software”
- Touch “Patch Tag” and enter the patch iqpanel4.5.1 then touch OK
- Touch “Upgrade Using Network” (Panel must be connected to Wi-Fi). Update will download and install
- Once complete touch “OK” to reboot the Panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5 minutes. After the Panel reboots the home screen will appear and the LED will turn green.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>