Johnson Controls PD700 Plug In IQ Dimmer Installation Guide
- June 3, 2024
- Johnson Controls
Table of Contents
Johnson Controls PD700 Plug In IQ Dimmer
FEATURES & OVERVIEW
The IQ Dimmer can be used to turn any outlet into a smart outlet to turn lamps On, Off, or control dimming of any lamps with dimmable light bulbs. Each Z-Wave device also serves as a repeater in the Z-Wave network, extending and improving the mesh network in the installed location.
The IQ Dimmer is a Z-Wave Plus® certified device and includes S2 security and SmartStart. You can now add this device securely and with ease using QR code on the product.
Use Locations:
- Kitchen
- Living Room
- Basement
- Bedrooms
- Garage
WARNING: Do not install to control a motor-operated Appliance, a non-
dimmable fluorescent lighting fixture, or a transformer-supplied appliance.
The lighting devices connected to this Z-Wave module must not exceed 2.SA,
300W incandescent, 150W dimmable CFL/LED, 120VAC 60Hz
SPECIFICATIONS
- Works with incandescent and most dimmable florescent (CFL), or LED lighting
- 800 Series Z-Wave
- LED to indicate ON/OFF status
- Remotely or manually turns ON or OFF, or DIM lights
- Controls light fixtures up to 300W Incandescent and 150W Dimmable LED/CFL
- Z-Wave Plus Certified with S2 security and SmartStart (QR code on bottom of device)
- Safety tab to secure unit to AC outlet
- Compact design – does not !block the 2nd AC outlet
- Supports Network Wide Inclusion (through a repeater)
- Functions as a Z-Wave signal repeater
- Indoor Use Only
- Operating ambient temperature 0 °C – 40°C
- Class II
- Purpose of control: Operating Control;
- Construction of control: Portable Direct Plug In Type;
- Type 1 Action;
- Pollution Degree: 2
- Impulse Voltage: 1500 V
- Not Suitable for Appliances which only allowed to be plugged into wall outlet or a single outlet circuit, such as room heaters and window air conditioners.
STEP 1: DETERMINE INSTALLATION LOCATION
Plug in the IQ Dimmer at desired location
STEP 2: PREPARE THE PANEL TO ENROLL THE IQ DIMMER
Select “Add device” from Z-Wave menu
Press the “Include” button
STEP 3: PAIRING WITH THE IQ PANEL
Press the button on the top of the IQ Dimmer once to enroll with the IQ Panel.
Customize name
Complete pairing process by touching Add
Test device to ensure proper function
Document#: XXXXXX
Revision#: XX/XX/22
Issue Date: XXX 2022
Qolsys Product#: QZ2143-840
Responsible Party – US Contact
Information; Qolsys, Inc.
1919 S Bascom Ave, Suite 600
Campbell, CA 95008, United States
Oolsys Inc. proprietary. Reproduction without permission is not permitted.
FCC ID: 2AMY9PD800
IC: 22968-PDBOO
Supplier’s Declaration of Conformity; 4 7 CFR
2.1077 Compliance Information
Model: PD800
GOT QUESTIONS?
CONTACT TECH SUPPORT
intrusion-support@tycoint.com
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
This is a quick guide for experienced installers only. Refer tohttp://dealers.qolsys.com (login required)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>