Johnson Controls IQ Panel 4-IQ4 Hub User Guide
- June 3, 2024
- Johnson Controls
Table of Contents
Johnson Controls IQ Panel 4-IQ4 Hub User Guide
TECHNICAL SERVICE BULLETIN
IQ PANEL 4/IQ4 HUB – 4.2.1 SOFTWARE UPDATE – RELEASE NOTES AND INSTRUCTIONSTSB
: 221017
DATE: 10/17/22
RE: IQ PANEL 4/IQ4 HUB – 4.2.1 SOFTWARE UPDATE
RELEASE NOTES & UPDATE INSTRUCTIONS
Release Notes:
Fixes/Improvements:
- Corrected an issue where a small number of IQ Panel 4’s experienced a false panel overheating shutdown event caused by an inaccurate panel battery temperature reading.
Update Instructions:
Compatibility Note: Your IQ Panel must be on software version 4.1.1 or higher and connected to Wi-Fi to install this update wirelessly. Panels running 4.0.0, 4.0.1 or 4.1.0 must be updated to 4.1.1 first, then they can be updated directly to 4.2.1.
- Swipe down from the top of the screen and touch “Settings”
- – Touch “Advanced Settings”
- – Enter a valid installer code (default is 1111)
- – Touch “Upgrade Software”
- -Touch “Patch Tag” and enter the patch iqpanel4.2.1 then touch OK
- – Touch “Upgrade Using Network” (panel must be connected to Wi-Fi). Update will download and install
- Once complete touch “OK” to reboot the panel. DO NOT TOUCH THE SCREEN. The update process will take approximately 5 minutes. After the panel reboots the home screen will appear and the LED will turn green.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>