datacolor Elite Colorimeter Spyder Camera User Guide
- September 20, 2024
- datacolor
Table of Contents
Spyder
QUICK START GUIDE
Elite Colorimeter Spyder Camera
What You Get
- Spyder Sensor
- Serial Number
- Welcome Card with link to software and support resources
- USB-A Adapter
System Requirements
- Windows 10, 11 32/64
- Mac OS X 10.14 – Mac OS X 14
- Monitor Resolution 1280×768 or greater, 16-bit video card (24-bit recommended, 1GB of available RAM, 500MB of available hard disk space
- Internet connection for software download
- USB-C or USB-A port
Support
support.datacolor.com
Before You Begin
Your monitor should be turned on for at least 30 minutes before you begin the calibration process. Make sure that no direct light is falling on your display. Reset the monitor controls to the factory default settings, if available. Please deactivate any Auto Brightness features on your monitor.
Step 1 – Install and Activate
Install the Spyder software from the Datacolor
Website. After the installation is
complete, plug in your Spyder and launch the software to begin the activation
and registration process. This will automatically start your Warranty. Use the
Serial Number included in your Spyder package to activate your software.
Step 2 – Prepare for Calibration
Ensure your Spyder is plugged into a powered USB port on your computer before
you launch the Spyder application. Follow the step-by-step on-screen
instructions. Remove the lens cap from the Spyder colorimeter. Hang the Spyder
unit over your display when asked, using the lens cap, which slides on the USB
cable, as a counterweight to keep it in place. If necessary, angle your
display back to keep the Spyder flat against your screen. Step 3 –
Calibrate
The Spyder software will walk you through the calibration process and create a
custom display profile, which your operating system and color managed
applications will use to correct your displayed colors. Click ‘Help’ in the
bottom left corner of the screen to help with any feature of the software. You
may also refer to the User Guide or Calibration video for assistance with
calibration.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>