ELECTRO DEPOT BY-S5 Razor Instruction Manual

September 20, 2024
ELECTRO DEPOT

ELECTRO DEPOT BY-S5 Razor

Thank you!
Thank you for choosing this BEYOU product. BEYOU products are chosen, tested, and recommended by ELECTRO DEPOT, s o you can be sure you are getting a top- quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.

Parts

  • A Cap
  • B Blade
  • C Switch
  • D Main body
  • E Type C charging port
  • F LED display
  • G Brush
  • H Type C cable
  1. Low battery reminder
  2. Travel lock
  3. Cleaning reminder
  4. Power left

Specifications

Rated supply: 5V DC 1.0A
Charging time: about 2H
Battery: Li-ion 800mAh
Waterproof: IPX5

How to use the appliance

  • The appliance can be used after charging the battery or by connecting to the mains
  • The USB cable should be properly connected to the socket.
  • The shaver starts working after pressing the switch.
  • In order to turn off the appliance, the switch should be pressed again.
  • The appliance is equipped with an internal battery. Charging time is about 2 hours.
  • In order to increase the battery life-span charging should be done in one uninterrupted cycle after full discharging.
  • The low battery reminder icon in display will be flashing if the left power is less than 15%.
  • Charging status is indicated by a LED display. The digital number will be grown up by each 1%. The LED display will show 100% first and turn off after several seconds when the battery is fully charged.
  • After charging, the appliance should be disconnected from the mains and the USB cable should be unplugged from the socket.
  • When the cleaning reminder is shown in display, please clean the blade chamber as soon as possible.
  • Long press the switch button for 3-5 seconds when the appliance is off, so the travel lock will be activated. And then the travel lock symbol will be shown in the display.
  • Long press the switch button for 3-5 seconds when the appliance is in travel lock status, so the travel lock function will be cancelled. And then the travel lock symbol will be disappeared in the display.

Cleaning and preservation

  • Before cleaning, turn off the appliance and remove the USB cable from the socket
  • After each shaving, the blades chamber should be empty. In order to clean it, please cleaning it in running water first, and then open the shaving head housing by pulling up, cleaning the products as below pictures again. Before cleaning by running water, the attached brush may be used.
  • Chamber blades can be washed under running water.
  • The whole appliance can be cleaned in running water.
  • Do not use any cleansing agents which are strong and damage the surface.
  • Wipe the housing with a moistened cloth.
  • In case of cleaning under the water the appliance must be entirely dry before next use.

Replacement of strainers and knives

To replace the knives and strainers, follow the step-by-step disassembly instructions as fig. 1 and fig. 2.

The knives and strainers are working components and should be replaced systematically.
They are not covered by warranty.

CAUTION : This appliance is waterproof. So it can be cleaned in running water directly when appliance is in power off status.

Warning!

  • Don’t take the power supply out from the socket by wet hands to avoid the risk of electric shock.
  • As soon as the charging is finished, take the power supply out from the power socket and take the plug out from the product.
  • Please hold the plug and take it out. Don’t pull the cord in order to avoid any damage for the adaptor.
  • Don’t charge the product more than 6 hours each time.
    Otherwise, the life time of battery will be reduced.

If there are no precautionary measures, the characteristics of the product may change.
To provide additional protection, the installation, in the electrical circuit supplying the bathroom, of residual current device (RCD) of rated residual operating current, not exceeding 30mA, is recommended. Ask your installer for advice.

NOTE : A circuit breaker is not a residual current device (RCD).

Storage

  • Always unplug the unit before storing it.
  • Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
  • Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

WARRANTY CONDITIONS
This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase. This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.
proof of purchase required.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

ELECTRO DEPOT User Manuals

Related Manuals