ELECTRO DEPOT 968865 Electric Kettle Instruction Manual

Kettle
INSTRUCTIONS FOR USE

968865 Electric Kettle

Thank you!
Thank you for choosing this COSYLIFE product.
COSYLIFE products are chosen, tested, and recommended by ELECTRO DEPOT, so you can be sure you are getting a top-quality, easy-to-use product that won’t let you down.
We’re confident your new device will be a pleasure to use every day!
Welcome to ELECTRO DEPOT.

Product overview

Parts

A Lid
B Lid release button
C Handle
D Power button with indicator light (I/0)
E Power cable with a power plug| F Water level gauge
G Base
H  Power cable storage space
I Spout
J Removable filter
---|---

Product overview

• Unpack the unit. Remove all the labels from the unit. Check that it is complete and in a good condition. If the unit is damaged or faulty, do not use it and take it to your retailer or after-sales service centre.
• Keep all packaging out of the reach of children. There is a risk of accidents if children play with packaging materials.

Intended use

• This unit has been designed exclusively to boil water. Do not use it for any other purpose or to boil other liquids.
• Any other use may damage the unit or cause injury.

Technical specifications

Product usage

Before first use

• Fill the kettle with fresh water up to the MAX mark, then boil the water 2 or 3 times. Discard the water after each cycle. This operation will eliminate any residue created during the manufacturing process.
• Due to the manufacturing process, the unit may emit a faint burning smell when first turned on. This is completely normal and does not indicate the presence of a manufacturing defect or that the product is dangerous.
• Clean the unit ( → Cleaning and maintenance).

Use

• Remove the power cable from its storage space and unwind it.
• Remove the kettle from the base.
• To open the lid: press the release button.
• Fill the kettle with water.
• Do not exceed the MAX mark and do not fill it below the MIN mark.
• To close the lid: press down on the lid.
• Place the base on a flat surface.
• Place the water-filled kettle on the base.
• Plug the power cable into a mains socket.
• Set the power button to I. The power indicator will light up. The kettle will begin to boil the water.
• The kettle turns off automatically once the water starts to boil. The power indicator will turn off.
• Unplug the power plug from the mains socket.

Note : The boiling process can be stopped manually at any time by switching the I/O power switch to O.

CAUTION

• Do not open the lid when steam is escaping from the spout.
• Exercise extreme caution when moving a unit containing hot water.

Safety

• The kettle is fitted with a safety device to prevent overheating. This overheating protection device shuts down the unit if the water tank is empty or there is not enough water in it.
• If the safety device is triggered, remove the plug from the mains socket. Always make sure there is enough water in the tank. Activating the safety device repeatedly may reduce the kettle’s service life.

Cleaning and maintenance

Cleaning and maintenance

WARNING

• Before cleaning or maintaining the unit, make sure that it has been switched off and unplugged from the mains socket. Then let it cool completely.
• Never immerse the unit in water or any other liquid.
• Clean the unit with a soft, slightly damp cloth. Make sure that no moisture gets inside the unit while cleaning it.
• Never use corrosive cleaners, wire brushes, abrasive scouring pads or metal/sharp tools to clean your unit.
• Thoroughly dry the unit after cleaning it.
• Store the unit in a cool, dry place, out of the reach of children and pets.
• Wind the power cable around the cable storage compartment on the bottom of the base.

Cleaning the filter

• Remove the filter from the spout.
• Rinse the filter with lukewarm water, then gently remove the limescale deposits with a soft brush.
• Reposition the filter by pressing down to secure it in the spout. It will only fit one way around.

Descaling

CAUTION
Descale the kettle regularly. Descaling intervals depend primarily on the hardness of the water and the frequency of use. Only use commercially- available descaling agents and follow the manufacturer’s instructions.

• Fill the tank with water up to the MAX mark on the water level gauge, then add the descaler.
• Start the boiling process.
• After boiling, discard the water and descaler solution.
• Avoid pouring the water and descaler solution into an enamelled water basin. Do not reuse the same mixture. If unsatisfied with the results, repeat the steps.
• Descaling residues can affect the taste of the water. Boil clean water 2 to 3 times to remove any residue.

Storage

• Always unplug the unit before storing it.
• Store the unit in a fresh, dry and dust-free place, out of the reach of children and pets.
• Please retain the packaging and use it to store your unit when it is not in use for an extended period of time.

WARRANTY CONDITIONS
This product is guaranteed against faults caused by defects in manufacturing or the materials used for a period of two years, starting from the date of purchase. This warranty does not cover defects or damage caused by failure to install the device correctly, incorrect use of the product, or excessive wear and tear.
proof of purchase required.

ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL – FRANCE
006 LOGO

References

• ELECTRO DEPOT - Electrodomésticos, Imagen, Informática , Telefonía | ELECTRO DEPOT

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>