DBK PTEL01 Ducati Hypermotard 698 Mono Frame Protection Instruction Manual
- September 18, 2024
- DBK
Table of Contents
DBK PTEL01 Ducati Hypermotard 698 Mono Frame Protection
Product Information
- Product Name: FRAME PROTECTION SLIDER HYPER 698 MONO / FRAME PROTECTION SLIDER HYPER 698 MONO instruction kit
- Product Code: PTEL01
- Origin: Made in Italy
FAQs
- Q: Can I install the protection slider myself?
- A: It is recommended to have the installation done by a specialized mechanic to ensure proper assembly.
- Q: How should I support the engine during installation?
- A: It is recommended to support the engine with a hydraulic jack when removing OEM screws for installation.
PARTS
TOOLS
IMPORTANT SAFETY NOTE
- 1 NOTE
- WARNING: IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT ALL FIXINGS ARE FULLY TIGHTEND
- Note 2
- WARNING: IT IS RECOMMENDED TO SUPPORT THE ENGINE WITH A HYDRAULIC JACK WHEN REMOVING OEM SCREWS
Precautions And Disclaimer
Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only on private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation. Customers buying the above-mentioned products, who intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.
Installation and mounting
Read and follow these instructions carefully, an essential part of the product. We recommend that the installation and mounting of the parts be done by qualified mechanics or specialized mechanical stores. The company takes no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.
Cleaning and service
All DBK products require regular inspection and maintenance. The greater their use, the greater the frequency of checks must be. If you find any parts missing, damaged, worn, or with an irregular appearance, immediately consult your DBK dealer before using the motorcycle. In any case, never try to repair or modify DBK products or their parts, replace them with original DBK components. DBK products may not be compatible with your motorcycle. Do not use chemical products such as alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers. FRAME PROTECTION SLIDER HYPER 698 MONO instruction kit art. PTEL01 DBK recommends having the installation done by a specialized mechanic
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>