DBK R1300GS Handguards Protection Kit Instruction Manual
- July 15, 2024
- DBK
Table of Contents
DBK R1300GS Handguards Protection Kit
Product Information
Specifications
- Model: SPM04SX-C / SPM04DX-C
- Origin: Italy
- Components: Slider Paramani – Handguards Protection
- Recommended Installation: By specialized mechanic
Product Usage Instructions
Installation
- Refer to the workshop manual for tightening torques.
- Make sure to mount the Slider Paramani on the clutch side (LATO FRIZIONE) and handguards on the brake side (LATO FRENO).
- Use OEM screws for installation. Remove existing OEM parts before installing.
- For proper installation, it is recommended to have a qualified mechanic or specialized mechanical store perform the installation.
Maintenance
- Avoid using chemical products like alkaline degreasers or acids as they can damage the anodized surface.
- Use only mild soaps for cleaning and avoid pressure washers to maintain the product’s quality.
FAQs
Q: Can I install the product myself?
A: It is recommended to have a specialized mechanic install to ensure proper fitting and avoid any damage.
Q: What should I do if I don’t have OEM screws?
A: It is advisable to use screws that are compatible with the product specifications. Consult with a mechanic for suitable alternatives.
Q: Is the product suitable for all motorcycle models?
A: The product is designed for specific models as mentioned in the user manual. Ensure compatibility before installation.
INSTALLATION INSTRUCTION
CLUTCH SIDE
PARTS
See the workshop manual for tightening torques
BRAKE SIDE
Terms of use
Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are
designed and meant to be used only on private roads closed to public traffic
or for racing use in closed tracks, they are not therefore provided with
homologation.
Customers buying the above-mentioned products, who intend to use them on a
public street, must require in advance the homologation (or an updated
registration) to their country’s competent authority, otherwise, they
acknowledge to be in breach of the law of the country in which they are using
the above-mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor takes no
responsibility in case of fine, penalty or damage which may occur to the
customer and user.
Installation and mounting
We recommend that the installation and mounting of the parts be done by
qualified mechanics or specialized mechanical stores.
The company takes no responsibility for damage occurring to things and/or
people in case of wrong and inaccurate installation.
Cleaning and service
Do not use chemical products such as alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.