DBK PCM01 Stelvio Engine Protection Kit Installation Guide
- July 10, 2024
- DBK
Table of Contents
DBK PCM01 Stelvio Engine Protection Kit
Product Information
Specifications:
- Product Name: PROTEZIONE COPPA MOTORE V100 – V100 ENGINE SUMP PROTECTION
- Art. No.: PCM01
- Origin: Made in Italy
- Recommended Installation by Specialized Mechanic
Product Usage Instructions
Tools Required:
- 4 – 5 mm Allen Key
- 8 mm Allen Key
- 9.5 Nm Torque Wrench
Parts Included:
N. – COD. | Qt. |
---|---|
1 – PCM01-C | 1 |
2 – DIST59 | 4 |
3 – TBE035 – VITE M8x20 | 4 |
4 – TBE023 – VITE M6x25 | 2 |
Grease Application:
Apply grease underneath the washer to facilitate assembly.
Installation Guidelines:
We recommend having the installation and mounting of the parts done by
qualified mechanics or specialized mechanical stores to prevent damage. The
company does not take responsibility for damage caused by incorrect
installation.
Cleaning Instructions:
Avoid using chemical products like alkaline degreasers or acids as they can
harm the anodized surface. Use mild soaps for cleaning and avoid pressure
washers.
FAQ
-
Q: Can I install the product myself?
A: It is recommended to have the installation done by a specialized mechanic for proper installation and to prevent any damage. -
Q: What type of cleaning products should I avoid using on the product?
A: Avoid using alkaline degreasers or acids as they can be harmful to the anodized surface. Use only mild soaps for cleaning.
PARTS
Terms of use, necessary precautions and disclaimer
All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only in private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation. Customers buying the above-mentioned products, which intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.
Installation and mounting
We recommend that the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation.
Cleaning and service
Do not use chemical products such as: alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.