Shenzhen Dbk Electronics WC067BLK Wireless Charging Pad User Guide
- June 6, 2024
- Shenzhen Dbk Electronics
Table of Contents
Shenzhen
Dbk Electronics
WC067BLK Wireless Charging Pad
User Guide
What is in the box?
-
SW Qi Charging pad
-
A 3-ft micro-USB
-
User Manual to the USB charging cable
Get to know your 5W Qi wireless charging pad
Wireless Charging Pad|
---|---
Input| Micro USB, DC 5V/2A
Output| 5W
Dimension| 88 X 8mm
Compatibility
- Oi-enabled devices up to 5W
- Any Qi-compatible smartphones
LED Indicator | Status |
---|---|
The blue light on for 3 seconds | Connected to power |
Off | Stand by for charging |
The blue light on continuously | Charging device |
Blue light (flashing) | Foreign object detected (Remove it before charging) |
How to charge your devices.
- Connect the Micro-USB power/charging cable to the Micro USB port on your charging Pad
- Connect charging cable with charging pad to any 5V/2A minimum power supply for charging
- Begin to charge
- Remove any foreign object (if any)
Example: Magnet or holder
If there is any foreign object detected, the LED indicator will be flashing.
**Thick protective case ≥5mm or a case includes a magnet or metallic material,
may not allow proper charging function.
Do not place any credit
card on the charging device.
Place your smartphone or any Qi-enabled device on the center of the charging
pad
The LED indicator will be on continuously during charging.
Caution
Avoid dropping
Do disassemble
No metal objects between devices and wireless charging pad
A thick protective case ≥5mm or a case that includes a magnet or metallic
material, may not allow proper charging function.
Keep wireless charging pad away from any liquids or moisture
The maximum ambient temperature during the use of this product must not exceed
45°C. Do not place the device in fire or other excessively hot environments.
Only use a dry cloth or brush to clean this product. Do not use if visible
defects are observed on the wireless charging pad.
Recommended using a 5V/2.4A or 5V/ 3.1A wall charger for proper function. If
the wall adapter is less than 5V/2A charger may malfunction.
Warning
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment
FCC Statements
This device complies with Part 15 of the FCC Rules Operation is subject to the
following two conditions
- This device may not cause harmful interference, and
- This device must accept any interference received including interference that may cause undesired operation
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected Consult the dealer or an experienced radio/TV
technician for help
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
May 10, 2021-V1
We’d love to hear from you. Scan with your Walmart app and let us know what
you think.