DBK DA03 Front Wheel Nut Installation Guide
- July 10, 2024
- DBK
Table of Contents
DBK DA03 Front Wheel Nut
Front Wheel Nut
- TO PREVENT THE WRENCH FROM MARKING THE NUT, USE RUBBER TAPE TO APPLY ON THE HEXAGON.
- DO NOT USE THE PNEUMATIC GUN TO SCREW, BUT ONLY THE WRENCH TORQUE AND REFER TO THE WORKSHOP MANUAL FOR THE TIGHTENING TORQUE.
- USE GR33-FA OR RETINAX HDX-TYPE GREASE TO PLACE ON THE THREAD AND THE NUT FACE.
Terms of use, necessary precautions, and disclaimer
All DBK products made and/or sold, dealing with the purchase Agreement, are designed and meant to be used only on private roads closed to public traffic or for racing use in closed tracks, they are not therefore provided with homologation. Customers buying the above mentioned products, who intend to use them on a public street, must require in advance the homologation (or an updated registration) to their country’s competent authority, otherwise, they acknowledge to be in breach of the law of the country in which they are using the above-mentioned products and, consequently, they take charge of the liability arising from the inappropriate use, thereon, the vendor takes no responsibility in case of fine, penalty or damage which may occur to the customer and user.
Installation and mounting
We recommend that the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company takes no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation.
Cleaning and service
Do not use chemical products such as alkaline degreasers or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.