DBK ROND11 BMW Exhaust Muffler Washer Installation Kit Installation Guide
- July 31, 2024
- DBK
Table of Contents
DBK ROND11 BMW Exhaust Muffler Washer Installation Kit
Product Information
- Product Name: Rondella Silenziatore Scarico BMW R1300GS Exhaust Muffler Washer Instruction Kit
- Product Code: ROND11
- Origin: Made in Italy
- Specifications
-
- Quantity: 1 kit
- Tools Required: TORX 40
- Recommended Installation: By a specialized mechanic
Product Usage Instructions
Installation Steps:
- Ensure the exhaust system is cool before beginning the installation.
- Remove the OEM muffler from your BMW R1300GS exhaust system carefully.
- Use the TORX 40 tool to install the new muffler washer from the kit.
- Tighten all fixings to 9.5 Nm torque.
- Double-check that all connections are secure before starting the engine.
Maintenance:
It is recommended to perform periodic inspections to ensure that all
fixings remain tightly secured. Regular maintenance will help maintain optimal
performance and safety.
Frequently Asked Questions (FAQ)
-
Can I install the muffler washer myself?
While it is recommended to have a specialized mechanic perform the installation, if you have experience working with exhaust systems and the necessary tools, you can install it yourself following the provided instructions carefully. -
How often should I inspect the fixings?
Periodic inspections should be conducted to check the fixings. It is recommended to inspect them at least every few months or after riding in rough conditions to ensure they are fully tightened.
Utensili/Tools
WARNING: IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT ALL FIXINGS ARE FULLY TIGHTEND.
Installation and mounting
Read and follow these instructions carefully, an essential part of the product. We recommend to have the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.