DBK KM51 Ducati Hypermotard 698 Mono Small Parts Kit for Rider Pedals Instructions
- July 9, 2024
- DBK
Table of Contents
DBK KM51 Ducati Hypermotard 698 Mono Small Parts Kit for Rider Pedals
Product Specifications
- Product Name: SMALL TRACK PEDAL HYPER 698 PILOT PEDAL PARTS/SMALL TRACK PEDAL HYPER 698
- Model : KM51
- Origin : Made in Italy
Product Usage Instructions
Installation
DBK recommends having the installation done by a specialized mechanic to
ensure proper assembly and functionality.
Tools Required
- 1x MOL026
- 2x RND011
Steps:
- Remove OEM parts from the pedal.
- Apply grease as needed for smooth operation.
- Replace the components on both sides of the pedal.
- Ensure all fixings are fully tightened.
Maintenance
Regular inspections are recommended to verify that all fixings are securely
tightened.
-
N. – COD. Qt
-
1 – MOL026 2
-
6 – RND011 2
-
Note 1
Replace on both side -
Note 2
WARNING : IT IS RECOMMENDED THAT PERIODIC INSPECTIONS ARE MADE TO ENSURE THAT ALL FIXINGS ARE FULLY TIGHTEN
Terms of use, necessary precautions, and disclaimer:
All DBK products made and/or sold, dealing with the purchase Agreement, are
designed and meant to be used only in private roads closed to the public
traffic or for a racing use in closed tracks, they are not therefore provided
with homologation. Customers buying the above-mentioned products, who intend
to use them on a public street, must require in advance the homologation (or
an updated registration) to their country’s competent authority, otherwise,
they acknowledge to be in breach of the law of the country in which they are
using the above-mentioned products and, consequently, they take charge of the
liability arising from the inappropriate use, thereon, the vendor takes no
responsibility in case of fine, penalty or damage which may occur to the
customer and user.
Installation and mounting
Read and follow these instructions carefully, an essential part of the product. We recommend that the installation and mounting of the parts to be done by qualified mechanics or specialized mechanical stores. The company take no responsibility for damage occurring to things and/or people in case of wrong and inaccurate installation. For correct installation, all tightenings must be carried out after the correct positioning of the accessories and without forcing the moving points once blocked, so as not to compromise the seal and correct functioning of the product.
Cleaning and service
All DBK products require regular inspection and maintenance. The greater their use, the greater the frequency of checks must be. If you find any parts missing, damaged, worn or with an irregular appearance, immediately consult your DBK dealer before using the motorcycle. In any case, never try to repair or modify DBK products or its parts, in any case replace with original DBK components. DBK products may not be compatible with your motorcycle. Do not use chemical products such as: alkaline degreaser or acids, for they can be harmful to the anodized surface, use only mild soaps and avoid the utilization of pressure washers.
DBK recommends to have the installation done by a specialized mechanic
MADE IN ITALY
FAQ
Q: Can I install the product myself?
A: It is recommended to have the installation done by a specialized
mechanic for proper assembly.
Q: What should I do if I notice loose fixings?
A: Perform immediate tightening of all fixings to prevent any safety
hazards.