SHOWVEN SPARKULAR Waver Fall User Manual
- September 17, 2024
- Showven
Table of Contents
SPARKULAR Waver Fall
“`html
Specifications:
-
Manufacturer: Showven Technologies Co., Ltd.
-
Model: HC8200
-
Max. Effect Height:
-
LARGE: 4m (Safety Radius: 5m, Safety Distance at Firing
Direction: 1.5m) -
LARGE I: 5m (Safety Radius: 6m, Safety Distance at Firing
Direction: 1.5m) -
LARGE II: 7m (Safety Radius: 8m, Safety Distance at Firing
Direction: 1.5m)
-
Product Usage Instructions:
Safety Instructions:
Ensure a safety radius around the machine of 1.5m. No person or
flammable materials should be within this radius.
In windy environments, adjust the safety distance based on wind
direction and speed.
Always wear safety goggles when entering the safety zone to
protect against eye injuries from sparks and consumables.
Operation Panel:
Use the keypad area to navigate through the menu options:
- MENU: Press to enter the settings interface
- UP: Move parameter values up
- DOWN: Move parameter values down
- MONI: Monitor the status of the main parts inside the
machine
Display Interface:
The main interface provides information on the machine’s
status:
-
Red background color in DMX area indicates DMX connection
-
Red background color in TEMP area indicates heating chamber
temperature has reached the set temperature -
Indicator light status on power switch provides information on
heating up and readiness for firing
Set Up Menu:
To access the setup menu, press MENU. Navigate through the menus
using LEFT and RIGHT buttons. Press EDIT to enter specific menus
and adjust parameters. Remember to press SAVE to save the
settings.
FAQ:
Q: What should I do if the machine displays an error code?
A: Refer to the error code explanations
provided in the manual. For example, E0 indicates a systematic
error, E1 relates to motor conditions, and so on. Follow the
instructions to troubleshoot or seek professional assistance if
needed.
“`
USER MANUAL SPARKULAR® waverFALL
V1.1 2024/07/02
Showven Technologies Co., Ltd.
Thanks for choosing SPARKULAR® waverFALL, we wish it will sparks up your show.
Please read the following manual carefully before operating this product.
Safety Instructions
Unauthorized repair are prohibited, it may cause serious incident. SPARKULAR®
waverFALL can be used in rain, please keep the device dry after use. Make sure
lid of feeding hopper are well covered when use SPARKULAR® waverFALL.
Consumable should keep away from moisture and stored in a dry sealed
environment. Check whether there is consumable aggregate in the output nozzle
both before and after
each show, if any, please clean it up, or it will affect the firing effect,
damage machine, even cause serious incident. There will be some sparks drop to
ground, make sure there are no flammable objects such as carpet on the ground
within the safety radius of the machine. The SPARKULAR® waverFALL power supply
cable maximum allowed cascade of 6pcs (220V version) / 3pcs (110V version),
exceed connecting may result in damage or even cause fire. Cover the output
nozzle of SPARKULAR® waverFALL is forbidden, inspect the machine before each
show, making sure no objects or material will block the output nozzle. Never
touch the nozzle of SPARKULAR® waverFALL danger of getting burnt. Never touch
the sparks which shooting out from the nozzle. Make sure no staff, audience
and flammable materials stays under the SPARKULAR® waverFALL.
Safety Distance
Safety distance for SPARKULAR® waverFALL divided into two parts safety radius around
machine (a) and safety distance at firing direction (b). No person and flammable materials are
allowed to stay inside the safety isolation zone when SPARKULAR® waverFALL was armed.
The safety radius around machine of 1.5m.
For safety distance at firing direction equals to maximum firing height + 1m. SPARKULAR®
waverFALL with maximum 90 waving firing angles, when firing wave sequence the safety
isolation zone is a three-dimensional sector area.
HC8200 Type
Max. Effect Height
Safety Radius around Safety Distance at
SPARKULAR (a)
Firing Direction (b)
LARGE
4m
5m
LARGE I
5m
1.5m
6m
LARGE II
7m
8m
The SPARKULAR® WAVERFALL safety isolation zone is a three-dimensional space with a cross-
section of 180° sector enclosed by a and b (check below diagram). We can understand it as a
safety area formed by a safety column with diameter of a, height of b rotate of ±90 degrees.
Unauthorized persons and objects are strictly prohibited from entering. Depending on the
firing sequence / angles the sector area changes accordingly.
In windy environment, increase the safety distance according to the wind direction and speed.
Sparks and consumables from the machine can lead to serious eye injury. Always wear safety
goggles when enter the safety zone.
Description
SPARKULAR® waverFALL is 180°waving spark fall effect originally developed by
SHOWVEN. It can firing in any single direction between -90° to 90° or in
waving sequences. With 72 preset firing sequences and various editable sparks
effect brings infinite creativity to your stage. It can also combined with
SPARKULAR WAVER to generate a spark effect in any direction of 360 degrees.
Technical Specifications
DIMENSION: 309 305 285mm WEIGHT: 17kg VOLTAGE: AC200-240V / AC100-120V,
50/60Hz WORK POWER: 500W HC8200 CONSUMPTION: 22g/min EFFECT HEIGHT ADJUSTBLE:
YES EFFECT ANGLE ADJUSTBLE: -90°~ 90° (180° waving angles) INTERFACE: 3-pin
and 5-pin XLR, POWER IN/OUT CONTROL: 6 DMX channels WORK TEMP.: -20 C~40 C
CONSUMABLE AND EFFECT HEIGHT: LARGE (3-4m), LARGE I (4-5m), LARGE II (5-7m)
Structure of SPARKULAR® waverFALL
1. Feeding Hopper Lid 2. Clamp 3. ARM alarming light 4. Display Screen 5.
Power Switch 6. Fuse 7. Power IN 8. Power OUT 9. 3-PIN DMX OUT 10. 3-PIN DMX
IN 11. 5-PIN DMX OUT 12. 5-PIN DMX IN
Operation Panel
1. Keypad area
MENU: Press enter setting interface UP: Parameter up DOWN: Parameter down
MONI: Status monitoring of main part inside machine 2. Monitoring Interface
From this interface, we can check the voltage and motor status of machine.
3. RFID area
RFID card come with consumable HC8200 bags, swiping card to identify
parameters and types of granules. The RFID card is disposable, one card can
only use one time. Each card can increase single machine 20min working time,
the maximum recharge time for SPARKULAR® waverFALL is 30min. 4. ARM alarming
light
ON: DMX connected or wireless remote function ON. BLINK: DMX armed, ready for
firing OFF: No DMX connection and wireless remote function OFF.
Display Interface
1. Main Interface:
Background color of DMX area: red means DMX connected. Background color of TEMP area: red means heating chamber temp. reached setting temp. machine is ready for firing. Indicator light status on power switch: flash means machine is heating up, long on means temp. reached setting temp.
2. Error information Error information E0 System IC E1 Motor condition E2
Temp. Sensor E3 P Temp. Over E4 Time Remain E5 K Temp. Over
E6 Heat Fail
E7 Tip Over
Explanation Systematic error Blower motor, shaft motor or feeding motor error Temperature sensor is not connected or damaged Machine shutdown due to chassis over temperature Firing time is insufficient, please swipe RFID card Machine shutdown due to heating chamber over temperature Heating fail, problem on heating PCB or mainboard, if disappear automatically, please check the power supply. Tilt sensor activated when machine slant over 45 degrees
3. Set Up Menu Press “MENU” enter setup menu, press LEFT, RIGHT to choose main menu, advanced menu or factory menu. Press “EIDT” can entering related menu and setting up related parameters.
4. Main Menu Parameters in main menu show in below table, press “UP”/ “DOWN” to change the value, please remember to press “SAVE” to save the setting.
Options
Range Default
Explanation
Set DMX Address 1-512
1 Set DMX Address
Manual Heat
ON/OFF
OFF Manual heat ON/OFF setting
Manual Fountain ON/OFF
OFF Manual Fountain ON/OFF setting
Sequence
2 – 72
2 Preset sequence setting
Max. Angle
0°~90°
90° Max. Angle limit
Min. Angle
-90°~0°
-90° Min. Angle limit
Invert
ON/OFF
OFF When turned on, all angles will be mirrored.
Head to middle ON/OFF
When ON and Channel 1 DMX value is 0, output ON nozzle will back to middle
position after running a
preset sequence.
5. Advanced Menu
Options
Range
Default
Explanation
Set Temperature Auto Clear Delay
400-620 0.1-0.9s
580
Setup SPARKULAR® heat chamber temperature
0.1s
Automatic clear material time setting
Wireless 2.4G
ON/OFF
OFF 2.4G wireless function setting
LCD Backlight
ON/OFF
ON
LCD backlight setting
Density
70-100
100 Feeding amount
Mode Selection
Factory Mode User Mode
Factory mode is for engineer only.
User Mode When in Factory mode machine can’t controlled by DMX console
Default Parameter
ON/OFF
OFF Parameters reset to default setting
Motor Protect
ON/OFF
ON
Motor protect function
Tip Over
ON/OFF
Tilt function switch, when machine
ON
slant over 45 degree it will stop
working.
Standby Switch Motor Disabled
ON/OFF ON/OFF
OFF
When ON, the machine can firing only when heating up was finished
OFF
Motor can’t waving when OFF
Key Sound
ON/OFF
ON
Keypad press sound setting
Middle Set
ON/OFF
When it is ON, after firing nozzle OFF will move to around 15 degree and
then back to middle slowly
*For better performance of SPARKULAR® waverFALL, please don’t change the default value
without permission from SHOWVEN®.
6. DMX Channel Mode
SPARKULAR waverFALL occupies 6 operational channels.
Channel CH1 CH2
CH3
Function Manual Angle setup
Manual Nozzle Waving Speed setup
Firing ON/OFF
Value 0~255: angle change from -90° to 90° 128: straight upward (0°) 0 and 255: Max Speed 1~254: Speed increase 0~15: Firing OFF 16~90: Firing height low 91~170: Firing height medium 171~255: Firing height high Maxi. Single firing duration is 60s
CH4
n/a
Reserved
0-2: no preset sequence
CH5
Preset sequence setup 3-255: preset sequence
DMX value = 2 + Sequence No.*2.55 (ROUND OFF)
0~49: Heating Up OFF (Emergency Stop)
CH6
Mode setup
50~200: Heating Up ON
201~255: Heating Up OFF (Emergency Stop)
Channel 1 (CH1): Manual Angle Setup SPARKUALR waverFALL output nozzle can be stayed at any angle between -90° to 90°, below is a list of typical angles used in our preset sequence with related DMX value.
Angle No.
Angle
DMX value
1
-90°
5
2
-75°
24
3
-60°
47
4
-45°
66
5
-30°
85
6
-15°
108
7
0°
128 or 0
8
15°
148
9
30°
169
10
45°
190
11
60°
213
12
75°
234
13
90°
255
Angle Definition SPARKUALR waverFALL with waving output nozzle firing between -90° to +90°, we devided 180 degree into 13 firing directions as below (audience side view).
Channel 5 (CH5): Firing Sequence
SPARKULAR waverFALL has 72 preset sequences, operator use related channel DMX value or
sequence No. to access certain sequence. Below, you can find sequence list.
No.
Ignition angle
Description
Firing Duration
1
Any angle
2
-90°
3
-75°
4
-60°
5
-45°
6
-30°
7
-15°
8
0°
9
15°
10
30°
11
45°
12
60°
13
75°
14
90°
15
(-90°) ~ 90°
16
90°~ (-90°)
17
(-90°)~ 90° ~(-90°)
18
(-75°)~ 75°~ (-75°)
Clear material Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Fixed angle firing Slow waving once Slow waving once Slow waving once Slow waving once
Depends on CH3 Depends on CH3 Depends on CH3 Depends on CH3 Depends on CH3
Depends on CH3 Depends on CH3 Depends on CH3 Depends on CH3 Depends on CH3
Depends on CH3 Depends on CH3 Depends on CH3 Depends on CH3
8s 8s 14s 12s
CH5 DMX Reference
Value 3-5 6-7 8-10
11-12 13-15 16-17 18-20 21-22 23-25 26-28 29-30 31-33 34-35 36-38 39-40 41-43
44-45 46-48
19
(-60°)~ 60° ~ (-60°)
Slow waving once
10s
20
(-45°)~ 45° ~ (-45°)
Slow waving 3 times
17s
21
(-30°)~ 30° ~ (-30°)
Slow waving 3 times
12s
22
(-15°)~ 15° ~ (-15°)
Slow waving 3 times
7s
23
(-90°)~ 90° ~ (-90°) Medium waving 5 times
12s
24
(-75°)~ 75° ~ (-75°) Medium waving 5 times
10s
25
(-60°)~ 60° ~ (-60°) Medium waving 5 times
8s
26
(-45°)~ 45° ~ (-45°) Medium waving 5 times
7s
27
(-30°)~ 30° ~ (-30° Medium waving 5 times
5s
28
(-15°)~ 15° ~ (-15°) Medium waving 5 times
3s
29
(-60°)~ 60° ~ (-60°)
Fast waving 10 times
5s
30
(-45°)~ 45° ~ (-45°)
Fast waving 10 times
5s
31
(-30°)~ 30° ~ (-30°)
Fast waving 10 times
4s
32
(-15°)~ 15° ~ (-15°)
Fast waving 10 times
3s
33
(-75°)~ 0° ~ (-75°)
Fast waving 10 times
4s
34
(-60°)~ 0° ~ (-60°)
Fast waving 10 times
3s
35
(-45°)~ 0° ~ (-45°)
Fast waving 10 times
2s
36
(-30°)~ 0° ~ (-30°)
Fast waving 10 times
2s
37
75° ~ 0° ~ 75°
Fast waving 10 times
5s
38
60° ~ 0° ~ 60°
Fast waving 10 times
4s
39
45° ~ 0° ~ 45°
Fast waving 10 times
3s
40
30° ~ 0° ~ 30°
Fast waving 10 times
3s
41
(-90°)~ 0° ~ (-90°)
Slow waving twice
11s
42
(-75°)~ 0° ~ (-75°)
Slow waving twice
10s
43
(-60°)~ 0° ~ (-60°)
Slow waving twice
8s
44
(-45°)~ 0° ~ (-45°)
Slow waving twice
6s
45
(-30°)~ 0° ~ (-30°)
Slow waving twice
5s
46
90° ~ 0° ~ 90°
Slow waving twice
11s
47
75° ~ 0° ~ 75°
Slow waving twice
10s
48
60° ~ 0° ~ 60°
Slow waving twice
8s
49
45° ~ 0° ~ 45°
Slow waving twice
6s
50
30° ~ 0° ~ 30°
Slow waving twice
5s
51
(-90°)~ 0° ~ (-90°)
Medium waving 5 times
7s
52
(-75°)~ 0° ~ (-75°)
Medium waving 5 times
6s
53
(-60°)~ 0° ~ (-60°)
Medium waving 5 times
5s
54
(-45°)~ 0° ~ (-45°)
Medium waving 5 times
4s
55
(-30°)~ 0° ~ (-30°)
Medium waving 5 times
3s
56
90° ~ 0° ~ 90°
Medium waving 5 times
7s
57
75° ~ 0° ~ 75°
Medium waving 5 times
6s
58
60° ~ 0° ~ 60°
Medium waving 5 times
5s
59
45° ~ 0° ~ 45°
Medium waving 5 times
4s
60
30° ~ 0° ~ 30°
Medium waving 5 times
3s
61
90° ~ 45° ~ 90°
Slow waving 3 times
10s
49-50 51-53 54-56 57-58 59-61 62-63 64-66 67-68 69-71 72-73 74-76 77-79 80-81 82-84 85-86 87-89 90-91 92-94 95-96 97-99 100-101 102-104 105-107 108-109 110-112 113-114 115-117 118-119 120-122 123-124 125-127 128-130 131-132 133-135 136-137 138-140 141-142 143-145 146-147 148-150 151-152 153-155 156-158
62
90° ~ 30°~ 90°
Slow waving 3 times
13s
63 (-90°) ~ (-45°) ~ (-90°) Slow waving 3 times
10s
64 (-90°) ~ (-30°) ~ (-90°) Slow waving 3 times
12s
65
(-90°) ~ 0°
Slow waving gradually decreases angle
18s
66
90° ~ 0°
Slow waving gradually decreases angle
18s
67
(-90°) ~ 90°
Slow waving gradually decreases angle
41s
68
0° ~ (-90°)
Slow waving once
5s
69
(-90°) ~ 0°
Slow waving once
5s
70
0° ~ 90°
Slow waving once
5s
71
90° ~ 0°
Slow waving once
5s
72
0°
Fixed angle firing
12s
DMX control example 1: firing sequence No. 42
1. Set output nozzle straight up CH1 = 128, CH2 = 0, CH3 = 0, CH4 = 0, CH5 =
0, CH6 = 128
2. Set preset Sequence No. 42 CH1 = 128, CH2 = 0, CH3 = 0, CH4 = 0, CH5 =
108, CH6 = 128
3. Firing CH1 = 128, CH2 = 0, CH3 = 255, CH4 = 0, CH5 = 108, CH6 = 128
159-160 161-163 164-165 166-168
169-170
171-173 174-175 176-178 179-180 181-183 184-185
DMX control example 2: firing sequence No. 8, firing time 10s 1. Set output
nozzle straight up
CH1 = 0, CH2 = 0, CH3 = 0, CH4 = 0, CH5 = 0, CH6 = 128 2. Set preset Sequence
No. 8
CH1 = 0, CH2 = 0, CH3 = 0, CH4 = 0, CH5 = 21, CH6 = 128 3. Firing, default
firing duration is 60s
CH1 = 0, CH2 = 0, CH3 = 255, CH4 = 0, CH5 = 21, CH6 = 128 Keep 10s. 4. Firing
OFF CH1 = 0, CH2 = 0, CH3 = 0, CH4 = 0, CH5 = 21, CH6 = 128
7. Wireless Control Mode:
When use remote controller, please disconnect DMX cable connection, set
machine to Wireless 2.4G to ON status. Match machine with remote controller by
Press “A” on remote controller
when machine at Wireless Control interface.
A: OFF / SET, Firing OFF, SET means match machine with remote controller.
B: Firing, vertical up (0°)
C: Firing, according to the sequence setting on machine
D: Clear Material 3s. Please replace the battery when the indicator light on
remote controller is weak. Battery mode: 9V stacked battery. Remote controller
for SPARKULAR waverFALL is optional accessory.
8. SHOWVEN HOST CONTROLLER ZK6200/6300 control: When use our host controller
control SPARKULAR® waverFALL please press “F3” and switch the device on HOST
CONTROLLER to CIRCLE FLAMER-6CH. Due to host controller with bidirectional
communication with SPARKULAR® waverFALL, for each unit of machine please do
allocate a unique DMX address as below: SPARKULAR No. 1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18
DMX Address 1 7 13 19 25 31 37 43 49 55 61 67 73 79 85 91 97 103 IMPORTANT
NOTICE: Allocate same DMX address to different machine will cause signal
interference and leads to malfunction of machine.
Operation Guide
1. Install SPARKULAR® waverFALL a) SPARKULAR® waverFALL suggest to be hanged
horizontally. b) Make sure the machine is securely installed to avoid falling,
make sure to install extra safety
rope for each machine. c) Check carefully the output nozzle of each machine,
make sure the output nozzle is in good
shape and there is no powder aggregate.
2. Fill SPARKULAR® waverFALL
a) Open powder bags and fill the feeding hopper.
b) Choose correct consumable according to the hanging height and safety distance.. SPARKULAR® waverFALL can only use HC8200 LARGE / LARGE I / LARGE II.
HC8200
Effect length (Low Output)
Effect length (High Output)
LARGE
3m
4m
LARGE-
4m
5m
LARGE-
5m
7m
c) Please be noted that there may sparks or remains fall to the ground. Make sure no
flammable material on ground in the safety zone.
d) Make sure the lid of hopper is locked tight after filling. SAFETY NOTICE:
Accidentally burning of consumable HC8200 in the hopper can only use sands to
extinguish.
3. Connect Power / DMX cable a) Connect a power cable to the POWER IN socket
of SPARKULAR® waverFALL. Connect the
other end of power cable to the power source. Make sure power supply in
consistent with the rated voltage of the equipment, and the socket must well
grounded. b) If connect machine in sequence, please connect a power link cable
to the POWER OUT of previous machine, connect the other end of the power link
cable to POWER IN of the next machine. c) The SPARKULAR® waverFALL power
supply cable maximum allowed cascade is 6 units (220V version) / 3pcs (110V
version). Do not connect exceed units to a single electrical circuit. d) Power
ON all SPARKULAR® waverFALL. e) Assign DMX address for each unit of SPARKULAR®
waverFALL. If use SHOWVEN host controller or FXcommander to control the
machine please allocate a unique DMX address for each unit of machine. If use
remote controller to control SPARKULAR® waverFALL wirelessly, please set
machine to wireless ON status and match machine with remote controller. For
DMX cable control please execute below operations (f to h). f) Connect a DMX
cable to the DMX IN socket of first unit of SPARKULAR® waverFALL, connect the
male connector end of DMX cable to your DMX controller (FXcommander, HOST
CONTROLLER, light console etc). g) Connect a DMX cable to the DMX OUT of
previous machine, and the other end of to the DMX IN of next machine. Connect
all devices in series in this way. h) Plug in a DMX terminator into the DMX
OUT in last unit of machine to improve signal reliability. Signal amplifier is
required for long distance (>200m) DMX signal transmission (SHOWVEN DMX
splitter 8 with bidirectional signal transmission, thus can get signal
feedback from device).
4. Activate SPARKULAR® waverFALL by swipe RFID card a) Swipe an RFID card.
Read the card as show below. SPARKULAR® waverFALL shows time
remain if read successfully. SPARKULAR® waverFALL report E4 when remaining
time is less than 10 minutes. b) Please note each RFID card come with 200g
package HC8200 can increase single machine 20min working time, the maximum
recharge time for SPARKULAR® waverFALL is 30min, when time remain reached
30min, it can’t recharge anymore RFID card.
CN. 00000001
5. Programming and Firing a) Programming SPARKULAR® waverFALL, set the firing
sequences etc. b) Heating up, it takes few minutes, it varies according to the
voltage and environment
temperature. c) Make sure the prescribed safety zone of related firing
sequences are clear. d) Suggest to clear material for SPARKULAR® waverFALL
before firing. e) Firing. In order to prevent overheat in the heating chamber
and protect machine, the
maximum continuous firing time for SPARKULAR® waverFALL is 60s. f) The
operator should always have a clear view of the device, so that he/she can
stop the
show immediately when there is danger. g) Running preset sequence No.1 to
clear material for SPARKULAR® waverFALL after show,
clear material will remove the remaining particles from heating chamber. NOTE:
If use SHOWVEN HOST CONTROLLER ZK6200/6300 to control the firing, please press
“F3” to choose “CIRCLE FLAMER-6CH”, then set the firing sequence, as for
preset sequence the firing duration is fixed, so please set firing duration
1s. Please do allocate different DMX address for each unit of SPARKULAR
WAVERFALL (6 channels), otherwise it will cause signal interference.
6. Turn Off and clean up a) Power off SPARKULAR® waverFALL, allow SPARKULAR®
waverFALL to cool down. b) Disconnect all POWER and DMX cables. c) Empty the
remaining HC8200 in hopper, and store the remaining HC8200 in a dry sealed
bottle for next time use. Never touch the output nozzle of SPARKULAR®
waverFALL when empty the hopper. DANGER OF GET BURNT! d) Operators can use
handheld vacuum cleaner to empty the feeding hopper. Do make sure the machine
was cool down when clean it. Do NOT use high-power vacuum cleaners to avoid
hot consumables being sucked into the vacuum cleaner from the heating chamber
and cause fire. e) Clean the surroundings to remove powder residues.
Maintenance
a) Empty the feeding hopper before shipment of machine. b) Empty the feeding
hopper if long time not use, for high humidity environment we suggest
to empty feeding hopper after each show. c) Clear material both before and
after the show.
Warranty Instructions
Sincere thanks for your choosing our products, you will receive quality
service from us The product warranty period is one year. If there are any
quality problems within 7 days after
shipping out from our factory, we can exchange a brand new same model machine
for you We will offer free of charge maintenance service for machines which
with hardware
malfunction (except for the instrument damage caused by human factors) in
warranty period. Please don’t repair machine without factory permission
Below situations NOT included in warranty service: Damage caused by use other
type of consumable which is not originally from SHOWVEN®. Damage caused by
improper transportation, usage, management, and maintenance, or
damage caused by human factors; Disassemble, modify or repair products without
permission; Damage caused by external reasons (lightning strike, power supply
etc.) Damage caused by improper installation or use;
For product damage not included in warranty range, we can provide paid
service. Invoice is necessary when applying for maintenance service from
SHOWVEN®.
Showven Technologies Co., Ltd.
Tel: +86-731-83833068 Web: www.showven.cn E-mail: info@showven.cn Add: No.1
Tengda Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan,
410300, P.R.China
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>