Panasonic EH-NA55 Hair Dryer Instruction Manual
- June 3, 2024
- Panasonic
Table of Contents
EH-NA55 Hair Dryer
English……………………………………… 3 …………………………………………. 17
Operating Instructions (Household) Hair Dryer Model No. EH-NA55
EH-NA55.indb 1
23/7/2562 14:14:10
2
EH-NA55.indb 2
23/7/2562 14:14:10
English
Operating Instructions (Household) Hair Dryer Model No. EH-NA55
Contents
Safety precautions………………… 4 Maintenance of the hair dryer ………. 11 Parts
identification …………………………8 Troubleshooting …………………………..13 About nanoeTM
……………………………….9 Specifications ………………………………14 How to use the hair dryer
……………..10
Thank you for purchasing this Panasonic product. Before operating this unit,
please read these instructions completely and save them for future use.
EH-NA55.indb 3
3
23/7/2562 14:14:10
English
nanoeTM is a trademark of Panasonic Corporation. A nanoeTM is a nano-sized ion particle coated with water particles.
Safety precautions
To reduce the risk of injury, loss of life, electric shock, fire, and damage to property, always observe the following safety precautions.
Explanation of symbols
The following symbols are used to classify and describe the level of hazard, injury, and property damage caused when the denotation is disregarded and improper use is performed.
Denotes a potential
WARNING hazard that could result in serious injury or death.
CAUTION
Denotes a hazard that could result in minor injury or property damage.
The following symbols are used to classify and describe the type of instructions to be observed.
This symbol is used to alert users to a specific operating procedure that must
not be performed.
This symbol is used to alert users to a specific operating procedure that must
be followed in order to operate the unit safely.
Some parts of the safety precaution illustrations differ from the actual
product.
4
WARNING
Plug and Cord
Do not use with the cord bundled. – Doing so may cause fire or electric shock.
Do not damage the cord or pulg. · Do not deface, modify, forcefully bend or
pull the
cord or plug. Also, do not place anything heavy on, twist or pinch the cord. –
Doing so may cause electric shock, burn or fire due to a short circuit.
Do not use when the plug or cord is damaged or hot. – Doing so may cause burn,
electric shock, or fire due to
a short circuit.
Never use the appliance if the plug fits loosely in a household outlet. –
Doing so may cause burn, electric shock, or fire due to
a short circuit.
Do not connect or disconnect the plug to a household outlet with a wet hand. –
Doing so may cause electric shock or injury.
Do not wrap the cord tightly around the main body when storing.
– Doing so may cause the wire in the cord to break with the load, and may
cause electric shock, burn or fire due to a short circuit.
Do not store or use the cord in a twisted state. – Doing so may cause the wire
in the cord to break with the
load, leading to electric shock or fire due to a short circuit.
EH-NA55.indb 4
23/7/2562 14:14:11
English
WARNING
Do not store the appliance in a bathroom or location with high humidity. Also,
do not place in a location where water may spill (such as top of vanity). –
Doing so may cause an explosion or fire.
Do not store within the reach of children or infants. Do not let them use it.
– Doing so may cause burn, electric shock, or injury.
Do not use in proximity of flammable materials (such as alcohol, benzine,
thinner, spray, hair care product, nail polish remover). – Doing so may cause
an explosion or fire.
Never modify, disassemble, or repair. – Doing so may cause ignition or injury
due to abnormal
operation. Contact an authorized service center for repair.
Do not use the appliance with a wet hand. – Doing so may cause electric shock
or fire due to a
short circuit.
This appliance is not designed for commercial use, and is not intended for use
without appropriate maintenance. – Doing so may cause burn or fire due to a
continuous
load or overload.
Do not immerse the appliance in water. Do not use the appliance near water. Do
not use the appliance near bathtubs, showers, basins or other vessels
containing water. – Doing so may cause electric shock or fire.
This symbol with prohibition sign in red on the appliance means “Do not use
this appliance near water”.
Do not use the appliance with a power supply voltage of 220-240 V while the
dual voltage switch is set to [100-120 V]. – Doing so may cause fire or burn.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance. – Failure to
do so may cause an accident or injury.
EH-NA55.indb 5
5
23/7/2562 14:14:11
English
WARNING
Disconnect the plug by holding onto it instead of pulling on the cord. –
Failure to do so may cause the wire in the cord to
break, and may cause burn, electric shock, or fire due
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent (described in the warranty), or similarly qualified persons in
order to avoid a hazard. – Failure to do so may cause an accident or injury.
In case of an abnormality or malfunction
to a short circuit.
Immediately stop using and remove the plug if
Regularly clean the plug to prevent dust from accumulating. – Failure to do so
may cause fire due to insulation failure
caused by humidity. Disconnect the plug and wipe with a dry cloth.
Always turn off the power switch and disconnect the plug from the household
outlet after use. – Failure to do so may cause fire or burn.
Insert the plug into the household outlet directly: Do not use with an
extension cord. Fully insert the plug. Always ensure the appliance is operated
on an
there is any abnormality or malfunction. – Failure to do so may cause fire,
electric shock, or injury.
authorized service center.
Maintenance
When you see sparks around the air outlet while using the hot air setting,
stop use and remove the lint on the air outlet and air inlet.
electric power source matched to the rated voltage indicated on the appliance.
– Failure to do so may cause fire or electric shock.
When the appliance is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the appliance is switched off.
– Failure to do so may cause an accident or injury.
For additional protection, the installation of a
– Failure to do so may cause burn or fire.
This appliance
Do not block or insert hair pins or other foreign objects into the air inlet,
air outlet, or nanoeTM outlet . – Doing so may cause fire, electric shock, or
burn.
Do not leave the area with the power switch left on. – Doing so may cause
fire.
residual current device (RCD) having a rated
residual operating current not exceeding 30 mA is
advisable in the electrical circuit supplying the
bathroom. Ask your installer for advice.
– Failure to do so may cause an accident or injury.
6
EH-NA55.indb 6
23/7/2562 14:14:11
English
CAUTION
To protect your hair
Do not use with the air inlet damaged. – Your hair may get tangled in the air
inlet, which could
damage the hair.
Be sure to keep a distance of
over 3 cm between the air
outlet and your hair.
– Failure to do so may cause burns to the hair.
DN
Be sure to keep your hair at least 10 cm away from the air inlet. – Your hair
may get tangled in
the air inlet, which could damage the hair.
DN
Note the following precautions
Do not drop or subject to shock. – Doing so may cause electric shock or ignition.
Do not use on children or infants. – Doing so may cause burn.
Do not touch the air outlet and quick-dry nozzle which will become very hot. – Doing so may cause burn.
Do not look into the air outlet while in use. – The hair dryer blows air with
dust, etc., possibly
resulting in injury.
Only use for drying or styling human hair or for skin. (Do not use on pets, or
to dry clothing, shoes, etc.) – Doing so may cause fire or burn. During use or
when unfolding or folding the handle, do not touch the shaded area as shown in
figures below. – Failure to do so may cause finger injury.
Notes · This appliance is equipped with an automatic overheating
protective device. If the appliance overheats, it will switch to cold air
mode. Switch off the appliance and unplug it from the household outlet. Allow
it to cool down for a few minutes before using it again. Check that no fluff,
hair etc. is in the air inlets and outlets before switching it on again. ·
This appliance can be used in areas with a power supply voltage of 100-120 V
as well as 220-240 V. · Check the voltage rating and shape of the household
outlet before use.
7
EH-NA55.indb 7
23/7/2562 14:14:11
English
Parts identification
A
Quick-dry nozzle
You can increase the drying rate by using the vertical strong and weak
airflows to dry and loosen bundles of damp hair.
8
A Air outlet
I Cord
B nanoeTM outlet
J Plug
C nanoeTM lamp
K Power switch
D Air inlet
3: Turbo (Strong hot airflow)
E Dual voltage switch
2: Set (Gentle hot airflow)
F nanoeTM ion charge panel 1: Cool (Cool airflow)
G Handle
0: Off
H Ring for hanging
L Quick-dry nozzle
About dual voltage switch
The dual voltage switch is set to [220-240 V] at the time of shipping.
[For regions with 100-120 V] Do not use a power supply voltage of 220-240 V
with the dual voltage switch set to [100-120 V]. A malfunction may result. The
heater will overheat and the safeguard will be triggered, causing cooler air
to fl ow.
[For regions with 220-240 V] If a power supply voltage of 100120 V is used
with the dual voltage switch set to [220-240 V], the airflow will not be
sufficient for drying or setting.
EH-NA55.indb 8
23/7/2562 14:14:11
English
About nanoeTM
What is nanoeTM?
nanoeTM nanoeTM is generated by collecting the available moisture in the air,
so depending on the usage environment, nanoeTM may not be generated. In
environments of low temperature and low humidity, moisture in the air becomes
diffi cult to collect. When this occurs, negative ions are generated. nanoeTM
is ion wrapped in water that are invisible to the human eye.
How nanoeTM works
Generally hair has properties which make it easy to become positively charged
with electricity. These properties attract strongly negatively charged nanoeTM
which penetrates the hair with moisture. Furthermore, they make the hair
slightly acidic, tighten cuticles and keep your hair strong, elastic and
healthy.
Ion charge
Hair is negatively charged when nanoeTM is continuously applied. Negatively
charged hair repulses nanoeTM, making it hard for nanoeTM to be applied to the
hair. When this occurs, simply by holding the nanoeTM ion charge panel
together with the handle, the negative charge accumulated on hair is released.
By doing this, nanoeTM can continue to penetrate the hair, supplying moisture
and moisturizing the hair thoroughly right up to the tip.
EH-NA55.indb 9
9
23/7/2562 14:14:12
English
How to use the hair dryer
1 Before using the hair dryer, check the voltage rating and shape of the
household outlet. Then set the dual voltage switch in accordance with the
voltage of your region. · Use a key head, etc. to turn the dual voltage switch
until it locks into place.
2 Confirm that the power switch is at position “0”. Then plug into a household
outlet and turn on the power switch.
3 Select the intensity of the airflow with the power switch, and then dry your
hair.
4 Set the power switch to position “0”, and then remove the plug from the
household outlet.
Notes
· Keep a distance of over 3 cm
between the air outlet and your hair.
· Keep the appliance at least 10 cm
away from your hair so that hair will
not be sucked into the air inlet.
· Be careful not to bump the air inlet
such as on the corner of a desk.
DN
DN
· Drops of water may blow out of the nanoeTM outlet during use, but this is
not a malfunction.
· A humming noise may come out of the nanoeTM outlet, but this is the sound of
nanoeTM being discharged and is not a malfunction.
· You may notice a characteristic odor when using this hair dryer. This is not
harmful to the human body.
· The effects of nanoeTM might not be felt by the following people. People
with crimpy hair, strong curly hair, very smooth hair, short hair, or who have
had a hair straightening perm in the last three or four months.
10
EH-NA55.indb 10
23/7/2562 14:14:12
English
Maintenance of the hair dryer
Always turn the power switch off and disconnect the plug from the household
outlet. (Except when performing maintenance on the air outlet)
Maintaining the air outlet
Do this about once a month or over 1. Plug into the household outlet. 2. Set
the power switch to “1” and use
cool air flow to blow away the dust. 3. While scraping dust and hair
jammed in the mesh with a tooth brush, blow them away with air.
Notes · When performing maintenance, do not block the air inlet with
your hand. · During or after maintenance of the air outlet, dust, etc. may
scatter. Ensure that the hair dryer blows no dust, etc. from the air outlet
before using. (Do not look into the air outlet.)
Maintaining the air inlet
Do this about once a month or over Wipe to clean lint, hair, or other matter
from the air inlet with a tissue or toothbrush.
If dust is attached to the inside, remove it with a vacuum cleaner.
Vacuum cleaner Note · Do not press or rub with your nails or sharp items.
Doing so may cause the air inlet to break.
EH-NA55.indb 11
11
23/7/2562 14:14:12
English
Maintaining the nanoeTM outlet
At least once a month In order to maintain the generation amount of nanoeTM.
1. Prepare a commercially available new cotton swab.
2. Gently insert the swab in the nanoeTM outlet until it stops (about 10 mm),
and then turn the cotton swab 2-3 times carefully.
Gently rub the tip of the needle portion
nanoeTM outlet
Note · It is easier to clean the nanoeTM outlet with a narrow cotton
swab (for example, one intended for babies).
Maintaining the main body
Do this when dirty To clean the hair dryer (when it is dirty), soak a cloth in
the soapy water and squeeze it out firmly, then wipe with the cloth.
Notes · Do not use substances such as alcohol, nail
polish remover or detergent (hand soap). Doing so may result in malfunction or
part cracks or discoloration. · Do not leave the appliance with hairdressing
products or cosmetics on it. Doing so will cause deterioration of the plastic,
leading to discoloration and cracks.
alcohol polish remover
12
EH-NA55.indb 12
23/7/2562 14:14:12
English
Troubleshooting
Problem
It switches frequently to cool air while using in “Hot” air, or sparks can be
seen within the body. (These sparks are caused by the thermostat switch which
is the protective device, and are not dangerous.)
The hot air repeatedly turns into cool air.
Possible cause
Action
Lint has accumulated on the air inlet or air outlet.
Hair or something is blocking the air inlet.
Remove accumulated lint. (See page 11)
Do not block the air inlet.
The hot air is abnormally hot.
The temperature of the airflow is low, and the airflow is weak.
The hair dryer is being used with the dual voltage switch set to [220-240 V] where the power supply voltage is 100-120 V.
Use with the dual voltage switch set to [100-120 V].
The noise is abnormally loud, and the inner part is bright red.
The hair dryer is being used with the dual voltage switch set to [100-120 V] where the power supply voltage is 220-240 V.
Use with the dual voltage switch set to [220-240 V].
The plug is abnormally hot.
The connection to the household outlet is loose.
Use a household outlet that fits securely.
Sparks are generated inside the nanoeTM outlet. The nanoeTM outlet emits a noise (crackling noise).
Abnormality caused by a dirty electrode (needle portion).
Perform maintenance of the nanoeTM outlet. (See page 12)
If the problems still cannot be solved, contact the store where you purchased the unit or a service center authorized by Panasonic for repair.
13
EH-NA55.indb 13
23/7/2562 14:14:13
English
Specifications
Product name
Hair Dryer
Product model
EH-NA55
Power source 100 V 50-60 Hz 110 V 60 Hz 220 V 50-60 Hz 230 V 50-60 Hz
Power consumption
950 W
1 100 W
1 200 W
1 300 W
120 V/240 V 50-60 Hz
1 400 W
Accessory This product is intended for household use only.
Quick-dry nozzle
14
EH-NA55.indb 14
23/7/2562 14:14:13
MEMO
EH-NA55.indb 15
15
23/7/2562 14:14:13
English
English
MEMO
16
EH-NA55.indb 16
23/7/2562 14:14:13
EH-NA55
…………………….. 18 …………………….. 22 nanoeTM…………………. 23 ……………… 24
…………………… 25 …………………….. 27 ………………………… 28
Panasonic
17
nanoeTMPanasonic Corporation nanoeTM
–
·
–
–
–
–
–
–
18
–
–
–
–
Panasonic
–
–
–
” ”
[100-120 V]220-240 V – –
19
–
–
–
–
–
30 mA RCD –
Panasonic –
– <> · · · – Panasonic
–
nanoeTM –
–
20
–
3 cm
–
DN
10 cm
DN
–
–
–
–
–
– –
·
· 100-120 V220-240 V ·
21
A
E
A B nanoeTM C nanoeTM D E F G H
I J K
3: 2: 1: 0: L
[220-240 V] [100-120 V] [100-120 V] 220-240 V [220-240 V] [220-240 V] 100-120 V
22
nanoeTM
nanoeTM
nanoeTM nanoeTM nanoeTM nanoeTM
nanoeTM
nanoe
nanoeTM nanoeTM nanoeTM nanoeTM
23
1 ·
2 0
3 4 0
·
3 cm
· 10 cm
·
DN
· nanoeTM
DN
· nanoeTMnanoeTM
·
nanoeTM
34
24
1. 2. [1] 3.
· ·
·
25
nanoeTM
nanoeTM 1. 2.
nanoeTM 10 mm 2 – 3
nanoeTM
· nanoeTM
·
·
26
EH-NA55
[100-120 V] 220-240 V [220-240 V] 100-120 V
nanoeTM nanoeTM
Panasonic
25
[100-120 V] [220-240 V] nanoeTM 26
27
EH-NA55
100 V 50-60 Hz 950 W
110 V 60 Hz 1 100 W
220 V 50-60 Hz 230 V 50-60 Hz
1 200 W
1 300 W
120 V/240 V 50-60 Hz
1 400 W
28
MEMO
29
MEMO
30
MEMO
31
EN, TW
EH-NA55.indb 17
Panasonic Corporation http://www.panasonic.com
© Panasonic Corporation 2019
Printed in Thailand EH9210NA551351 Y0819-0
23/7/2562 14:14:13