HyperX HX424C15FB3/8 8GB 1G x 64-Bit DDR4-2400 CL15 288-Pin DIMM Memory Module User Guide
- June 9, 2024
- HYPERX
Table of Contents
HyperX HX424C15FB3/8 8GB 1G x 64-Bit DDR4-2400 CL15 288-Pin DIMM Memory
Module
DESCRIPTION
HyperX HX424C15FB3/8 is a 1G x 64-bit (8GB) DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-2400 at a low latency timing of 15-15-15 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Note: The PnP feature offers a range of speed and timing options to support the widest variety of processors and chipsets. Your maximum speed will be determined by your BIOS.
FACTORY TIMING PARAMETERS
- Default (Plug N Play): DDR4-2400 CL15-15-15 @1.2V
- XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V
SPECIFICATIONS
- CL(IDD): 15 cycles
- Row Cycle Time (tRCmin): 45.75ns(min.)
- Refresh to Active/Refresh Command Time (tRFCmin): 350ns(min.)
- Row Active Time (tRASmin): 29.125ns(min.)
- UL Rating: 94 V – 0
- Operating Temperature: 0o C to +85o C
- Storage Temperature: -55o C to +100o C
FEATURES
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- On-Die termination (ODT)
- 16 internal banks; 4 groups of 4 banks each
- Bi-Directional Differential Data Strobe
- 8 bit pre-fetch
- Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
- Height 1.3425” (34.1mm), w/heatsink
MODULE WITH HEAT SPREADER
MODULE DIMENSIONS
The product images shown are for illustration purposes only and may not be an exact representation of the product. Kingston reserves the right to change any information at anytime without notice.
FOR MORE INFORMATION, GO TOHYPERXGAMING.COM
All Kingston products are tested to meet our published specifications. Some motherboards or system configurations may not operate at the published HyperX memory speeds and timing settings. Kingstonthe published HyperX memory speeds and timing settings. Kingston does not recommend that any user attempt to run their computerdoes not recommend that any user attempt to run their computers s faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.faster than the published speed. Overclocking or modifying your system timing may result in damage to computer components.
HyperX is a division of Kingston.
2019 Kingston Technology Corporation, 17600 Newhope Street, Fountain Valley,
CA 92708 USA. All rights reserved. All trademarks and registered trademarks
are the property of their respective owners.
hyperxgaming.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>