HANECO HANPURO15W300R LED 15W Puro300 Oyster Installation Guide
- June 4, 2024
- HANECO
Table of Contents
HANECO LED OYSTER INSTALLATION GUIDE
DONUT
Thanks for choosing our DONUT LED oyster products.
We strongly recommend that you read this manual carefully before installation.
Product Specifications
PRODUCT CODE | POWER | CCT | LUMEN | NET WEIGHT |
---|---|---|---|---|
DONUT25W | 25W | 3000K/4000K | 2200lm | 1.30kg |
Installation Instructions
-
Switch OFF main power supply
-
Mark and drill holes in the mounting surface and install plug anchors.
-
Remove front cover. Secure luminaire onto the ceiling.
-
Wire the luminaire in accordance with marked terminals.
-
Set the desired color temperature. For motion sensor dip switch, refer to the Intellisensor section of this installation guide.
-
Reattach the cover. Push in to ensure fully secured.
-
Switch ON main power
Product Code: DONUT25W-BK
DONUT25W-WH
DONUT25W-BK-MS
DONUT25W-WH-MS
HANECO LED OYSTER INSTALLATION GUIDE
Intellisensor dipswitch settings
NOTE: This section only applies to the below models:
- DONUT25W-BK-MS
- DONUT25W-WH-MS
Features:
- Integrated daylight and motion sensor
- 180° detection range
- 5m detection range
Settings:
WARNING
- The luminaire must be installed by a professional electrician.
- Switch power off when wiring the luminaire.
- Ensure input voltage conforms to the voltage range of the product.
- Ensure wires are securely connected.
- Before switching on, ensure that all the wiring is correct.
- The warranty is void if product is not installed according to the instructions.
For more information
www.haneco.com.au
1300 001 LED
Documents / Resources
|
HANECO HANPURO15W300R LED 15W Puro300
Oyster
[pdf] Installation Guide
DONUT25W, HANPURO15W300R, LED 15W Puro300 Oyster, HANPURO15W300R LED 15W
Puro300 Oyster, 15W Puro300 Oyster, Puro300 Oyster, Oyster
---|---