HANECO STAX30WG4 LED Flood Light Installation Guide

HANECO STAX30WG4 LED Flood Light

Product Information

Specifications:

• Model: STAX30WG4, STAX50WG4, STAX100WG4
• Power: 15/30W
• Color Temperature: 3000K, 4000K, 5000K
• Efficacy: 120lm/w @4000K
• CRI (Color Rendering Index): >80
• SDCM: 80
• Ambient Temperature: 80°C
• Dimension (mm): Customizable based on model

Product Usage Instructions

Installation Guide:

1. Ensure the power source is switched off before installation.
2. Choose a suitable location for mounting the LED floodlight.
3. Securely fix the floodlight using appropriate mounting hardware.
4. Connect the power supply following the provided wiring diagram.
5. Adjust the angle of the floodlight to achieve the desired lighting direction.
6. Switch on the power and test the functionality of the floodlight.

Maintenance:
Regularly clean the surface of the floodlight to ensure optimal performance. Check for any loose connections or signs of wear and tear periodically.

Troubleshooting:
If the floodlight is not functioning properly, check the power supply, connections, and ensure the bulb is not damaged. Refer to the troubleshooting section of the manual for detailed steps.

Frequently Asked Questions (FAQ):

• Q: Can I use these LED floodlights outdoors?
  A: Yes, these LED floodlights are suitable for outdoor use. Ensure they are installed in a weatherproof manner.

• Q: What is the warranty period for the STAX G4 LED Floodlight products?
  A: The warranty period is specified in the product documentation and may vary based on the model.

HANECO LED FLOODLIGHT INSTALLATION GUIDE **

**

STAX G4

• Thanks for choosing our STAX G4 LED Floodlight products.
• We strongly recommend that you read this manual carefully before installation.

WARNING

• The luminaire must be installed by professional electrician. Switch power off when wiring the luminaire. Ensure input voltage conforms to the voltage range of product. Ensure wires are securely connected. Before switching on, ensure that all the wiring is correct. The warranty is void if product is not installed according to the instructions.
• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
• The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.

MODEL| POWER| Color temperature| Eficacy (lm/w)| CRI| SDCM| Ambient temperature| Dimension (mm)
---|---|---|---|---|---|---|---
STAX30WG4| 15/30W| 3/4/5000K| 120lm/w @4000k| >80| <5| -20 to 45ºC| 15512430
STAX50WG4| 30/50W| 3/4/5000K| 120lm/w @4000k| >80| <5| -20 to 45ºC| 21016830
STAX100WG4| 75/100W| 3/4/5000K| 120lm/w @4000k| >80| <5| -20 to 45ºC| 27522035
MODEL| Weight (kg)| Max. Mounting height (m)| Max. Projected area (m²)
---|---|---|---
STAX30WG4| 0.71| 5| 0.024
STAX50WG4| 1.15| 5| 0.040
__STAX100WG4| 1.85| 5| 0.066

VOLTAGE/FREQUENCY 220-240Vac,50/60Hz

IP66 Junction Box

• *No supplied with product
• The terminal block should be complying with AS/NZS60998-2-1/IEC60998

Installation Instructions

1. Turn off the power.
2. Mark wall with appropriate fixing position, loosen the nut to make the angle adjustments before installing the bracket with appropriately rated fixing hardware.
3. Adjust luminaire to the desired angle then tighten the nut to secure the angle.
4. Connect luminaire to 240V main supply as per diagram.
5. Turn on the power.

IMPORTANT
POWER selections MUST NOT be changed whilst the product is energised

*Default Settings

For more information
www.haneco.com.au
1300 001 LED

References

• Haneco LED Lighting - Residential & Commercial Lighting | Australia

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>