HANECO STAX20W4K LED Floodlight Installation Guide
- June 4, 2024
- HANECO
Table of Contents
HANECO STAX20W4K LED Floodlight
Thanks for choosing the STAX LED Floodlight. We strongly recommend that you read this manual carefully before installation.
Product Specification
PRODUCT CODE| POWER| VOLTAGE/ FREQUENCY| PF| IK
RATING| IP RATING| OPERATING TEMPERATURE| NET
WEIGHT
---|---|---|---|---|---|---|---
STAX20W4K| 20W| ****
220-240Vac
50Hz-60Hz
| ****
≥0.9
| ****
IK08
| ****
IP66
| ****
-20 – +45°C
| 0.6kg
STAX30W4K| 30W| 0.6kg
STAX15W30W- TRI| 15W/30W| 0.6kg
STAX50W- TRI| 50W| 1.2kg
STAX100W4K| 100W| 1.8kg
STAX150W4K| 150W| 2.4kg
STAX200W4K| 200W| 2.8kg
Dimensions for installation
Bracket Dimensions:
| 20W| 30W| 15/30W| 50W| 100W| 150W| 200W
---|---|---|---|---|---|---|---
L1| 10 mm| 10 mm| 11.7 mm| 10 mm| 25 mm| 25 mm| 25 mm
L2| 50 mm| 50 mm| 34 mm| 50 mm| 70 mm| 100 mm| 100 mm
L3| 5.5 mm| 5.5 mm| 5.3 mm| 5.5 mm| 11 mm| 11 mm| 11 mm
L4| 5.5 mm| 5.5 mm| 5.3 mm| 5.5 mm| 11 mm| 11 mm| 11 mm
L5| 110 mm| 110 mm| 79.7 mm| 110 mm| 165 mm| 225 mm| 225 mm
W| 155 mm| 155 mm| 132 mm| 216 mm| 276 mm| 317 mm| 357 mm
Product Dimension:
| 20W | 30W | 15/30W | 50W | 100W | 150W | 200W | |
|---|---|---|---|---|---|---|---|
| L | 186.88 mm | 186.88 mm | 178.5 mm | 194.04 mm | 233.21 mm | 283.62 mm |
316.83 mm
W| 164.9 mm| 164.9 mm| 140 mm| 232.9 mm| 289.16 mm| 330.16 mm| 376.16 mm
D| 18.47 mm| 18.47 mm| 26 mm| 44.42 mm| 39.42 mm| 39.42 mm| 39.42 mm
Installation
-
Ensure the mains supply is switched off before commencing installation.
-
Mark the wall with an appropriate fixing position and install the bracket with appropriately rated fixing hardware.
-
Adjust the luminaire to the desired angle.
-
Connect luminaire to 240V main supply as per diagram.
WARNING
- The luminaire must be installed by a professional electrician.
- Switch power off when wiring the luminaire.
- Ensure input voltage conforms to the voltage range of the product.
- Ensure wires are securely connected.
- Before switching on, ensure that all the wiring is correct.
- The warranty is void if the product is not installed according to the instructions.
Product Code:
- STAX20W4K
- STAX30W4K
- STAX15W30W-TRI
- STAX50W-TRI
- STAX100W4K
- STAX150W4K
- STAX200W4K
For more information
www.haneco.com.au
1300 001 LED
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>